The best multimeter for home use: TOP 10 models

creativecommons.org

Every self-respecting man should have the device that we will talk about in this article. Why? It's simple - problems with wiring have existed for as long as the wiring itself. You constantly need to change sockets, chandeliers, find out fault locations and many other small things. And you obviously can’t cope without the most reliable multimeter.

We’ll tell you which best inexpensive multimeter is right for your home and how to find it in the store in just 3 minutes.

What does the best multimeter test - overview of functionality

Many years of experience in using electronic measuring instruments have shown that not all functions of a multimeter will be needed even by an avid electrician. Many of them are never even used in everyday life, so we will tell you only about the most necessary ones:

• Measurement of alternating voltage - current in the network.
• Constant – checking elements that are not part of a single network chain (batteries, accumulators, power supplies, etc.).
• Part resistance.
• Characteristics of capacitor volume,
  electrical appliances.
• Checking the integrity of the electrical conductor, searching for “breaks” in the wire in the power supply chain.

We will talk about these features of the best multimeter for home in the next section.

How to choose the best multimeter for home use - characteristics of options

Previously, we talked about the basic functions of testers, now it’s worth explaining in detail what each of them is needed for and what additional features may be:

• Voltage check. The variable is measured in the network in order to track current surges/sags in the circuit - household appliances, especially cheap ones, really do not like current surges and break down. We measure direct current in batteries.
• Wiring continuity. The most popular and frequently used function from the top multimeters. Thanks to it, you can find which wire from the core is broken and repair it. The tester can “ring” using a sound signal, an LED, or changing the numbers on the instrument display. The option that is found in the top 10 multimeters is sound.

• Resistance measurement. To fully measure this value, buy a separate ohmmeter. But for a one-time check of a phone or laptop board (of course, if you know what you’re doing), a tester is quite enough. Most devices from multimeter ratings have this function.
• Temperature measurement. This option is used to monitor the temperature in cables. A high indicator indicates a weak twist or too thin wires - you need to redo the connection or lay a stronger cable. Not all devices from the top best multimeters are capable of measuring this parameter, but it does occur, and quite often.

Which manufacturers of multimeters appear most often in ratings?

Before purchasing a high-quality measuring device, it is a good idea to consult with electricians or read reviews of equipment from third-party users - each manufacturer has its own advantages and possible disadvantages. We compared customer reviews and found the best brands in this category: Mastech, APPA, Fluke, Resanta, CEM. But don’t forget about other companies - if they are not so popular, then this is not at all an indicator of bad equipment.

Rating of multimeters for home - top 10 devices

CEM DT-2008

creativecommons.org

The review of the best multimeters included a device that works great in difficult conditions. The presence of a shock-resistant case, bright lighting and a convenient stand speak for themselves.

Automatic power off saves the device's charge and does not waste it. The device works with all the indicators that we discussed above, and gives a spread of no more than 4%.

IEK Universal M832

Among the top 10 digital multimeters there is also a stable model in all respects. Manual adjustment and control of work ensure the most accurate results.

Autonomy and low weight allow you to take it anywhere. Works with all standard indicators. Service life – at least 10 years.

Elitech MM 100

The list of the best multimeters was also supplemented by a company with some of the best home devices in the world. This model is distinguished by its portability. In addition to basic measurements, the tester can work with transistors and diodes.

The device has overload protection and is capable of operating in a network with a power of up to 1 kW. All indicators are displayed on the information board.

Bort BMM-1000N

The device from this company is distinguished by its wide measurement ranges: numbers for current - from 0 to 20 A, voltage (0-750 V) and resistance no more than 20 MOhm.

The tester measures capacitors, diodes and transistors. With such a wide range of functions, the error is minimal - only half a percent.

Mastech M1015B

In the rating of multimeters, it is considered the best analog device in terms of quality. In addition to direct current, resistance and voltage in the network, the tester controls “noise” and “rings” diodes and capacitors. Modes are switched using a rotary button.

Operating functionality - from 0 to +40 °C with humidity at the site no more than 75%. If it is available, it is easy to “ring” the network for breakdowns and interference.

Resanta YX-360 Trn

The good thing about this device is that it works for a very long time and is distinguished by its high safety. This is supported by a shock-resistant housing and an overload locking system.

Operating ranges and modes - 20. Measurement error - 3%.

ProsKit MT-2018

Has CE safety standard, which shows long service life for household tasks.

In addition to basic options, the tester can work with capacitors, transistors, batteries and batteries. The fuse prevents the selection of the wrong polarity.

Sunwa YX-1000A Master Professional

This pointer tester is miniature in size - you can even carry it in your pocket. The measurement indicator is visible even in a dark room.

The unit is powered by one AA battery. The ranges are switched manually, operating power is up to 1000 W.

UNI-T UT 58C

One of the most budget formats with precise measurements. The device also differs in that it records data about the previous measurement into the internal memory.

In low light conditions, you can connect LED backlighting. A reinforced rotary control is used for adjustment.

TEK DT 9208A

The main features are a shock-resistant case and a wide screen. The device automatically detects polarity when connected to a source.

There are 32 operating ranges and options. Additionally, the unit has a built-in surge protection system of any type.