How to insert a file into a manual jigsaw? Choosing a Tool Mount

The fastening of the jigsaw file is a rather weak part of the tool; it periodically breaks down. At the same time, replacing the unit is quite simple; in many cases, it does not even require tools. Step-by-step instructions for installing a new file are described in this material.

Types of saw holders

The jigsaw file clamp is the most vulnerable part of the entire mechanism, since it is subject to heavy load. Therefore, you need to choose it as carefully as possible, paying attention to the quality of the material. In addition, you need to understand what types of fastenings there are.

There are 3 types of saw holders. There may be a mount that has bolted clamps. There is also a convenient quick-release fastener. Another type is the radial clamp. Each of them is discussed in more detail below. Familiarization with the types will help you understand how to insert a file into a manual jigsaw.

Shoe mount

This is the very first jigsaw blade mount, which is used on both manual and electric models. Many manufacturers have already abandoned it, since changing the file is quite difficult and time-consuming.First, unscrew 2 bolts, then install the cutting element, then tighten it. To do this, you need to constantly have a hexagon, which is also not always convenient.

Quick clamp mount

This is one of the easiest ways to properly install a file in a manual jigsaw. You can replace the blade in just a minute. To do this, the user loosens the clamp by pressing the button, and then inserts a new cutting element there. No tools needed.

Radial mount

This type of fixation is even simpler and is used on modern models of instruments. It has a spring, with the help of which it is possible to return the cams to their original position. Replacement takes a few seconds.

How to insert a file

If we talk about how to properly place a file on a manual jigsaw, we can give several instructions as an example. They depend on what kind of equipment you are working with. The different action algorithms are described in more detail in the following sections.

Radial clamp

This is the simplest blade attachment for a jigsaw, so even a beginner can easily handle it. You need to do this:

1. Remove the casing covering the file.
2. Turn the lock clockwise and remove the blade. In this case, there is no need to release the latch - it is constantly held.
3. Turn the clamp for the electric jigsaw again and insert a new cutting element, after which the casing is put back. You can get your bearings by the appearance of a characteristic click.

Bolt-on clamp

This is a more complex process, and it cannot be done simply by hand. To install a saw blade holder for a jigsaw with your own hands, you will need additional tools. This could be a set of screwdrivers, a wrench or a hexagon. The algorithm of actions is as follows:

1. Remove the bolts that secure the blade. They can not be unscrewed completely - you can simply loosen the fastening with a screwdriver.
2. Remove the blade and install a new file.
3. Tighten the bolts again until fully secured. This is the main way to insert a file into a hand jigsaw.

Replacement with quick-release fastener

In this case, replacing the blade is also quite simple. The algorithm is as follows:

1. Remove the casing.
2. Press the lock key and pull out the old blade.
3. Install a new cutting element after hearing a characteristic click.
4. Release the key and put the casing back on.

Replacement using the example of a manual jigsaw

It is also useful to understand how to install the blade in a manual jigsaw. The step-by-step process looks like this:

1. The latches are removed - you can simply loosen them by moving counterclockwise.
2. Fix the file from above, placing it in the groove, and tighten the lock.
3. Bend the jigsaw slightly so that the second part of the cutting element reaches the corresponding part of the latch.
4. After the file is placed in the groove, tighten the second clamp.

Replacement in a jigsaw

Along with how to secure a file in a manual jigsaw, you should also consider the process of installing a new blade in an electric model. The instructions are about the same. You need to loosen the block fastening, turn the 2 bolts counterclockwise, and then place the blade so that the teeth point forward. After this, the bolts are tightened again.

If there is only one bolt on the block, it does not need to be loosened or fully tightened. Otherwise, there will be strong vibration during sawing.

As an example, you can also consider how to insert a file into a Makita jigsaw:

1. Pull the protective cover upwards until it stops. Turn the clamp at an angle of 90 degrees, remove the old cut and install a new one.The shank should enter the hole until a click is heard.
2. Release the latch.
3. Then put the casing in its original position.

Thanks to this, fastening the file in the electric jigsaw will be as reliable as possible.

Installing the blade into the machine

Now it’s clear how to insert a blade into a manual jigsaw. All that remains is to figure out how to replace the file in the jigsaw. To do this, proceed as follows:

1. Disconnect the machine from the outlet. Remove the casing.
2. The fabric is secured sequentially - first from above, then from below.
3. Pull it using a lever.
4. Put the casing in place.
5. Connect it to the network and check how the file on the jigsaw works.

Useful tips

Installing a new file is not that difficult. Moreover, in order for the tool to work as long as possible, it is recommended to pay attention to the following tips:

1. The saw blade is periodically inspected. Even small defects can lead to overheating of the electric motor and deterioration in cutting quality.
2. The jigsaw blade attachment point is vulnerable, so the clamps should not be tightened too tightly. As a result, the thread may break and the mechanism will fail prematurely.
3. The jigsaw roller is lubricated according to the recommendations in the instructions.
4. During operation, do not put too much pressure on the device, otherwise the clamp may be damaged.
5. The electric motor should not be overheated. Continuous operation should be no more than 30 minutes, and you should pay attention to the power indicator.

Thus, you can install a new file in both a manual jigsaw and electric models. Replacement is carried out in stages, as described in the instructions. After this, you need to check the strength of the fastening and carry out a test sawing.