Ball sterilizer for manicure instruments: how to use?

nail-dekor.com.ua

Sterilizers are also necessary in the field of manicure, as in medicine: without properly processed equipment, it is impossible to carry out procedures so as not to transfer any bacteria from a previous client to the next. That's why they came up with a glasperlene or ball sterilizer.

In our article we will tell you in detail how to use a sterilizer correctly, what it is and how to carry out procedures quickly and efficiently. Go!

What is a ball sterilization instrument

A ball sterilizer is a small device for treating all manual equipment with steam. The temperature inside the system ranges from 160 to 250 degrees. Under the pressure of hot steam, all harmful microbes and bacteria simply die - you can safely work with the next client.

What are the advantages and disadvantages of the device in question?

The Glasperlene device has a number of undeniable advantages, including:

• intense exposure to high temperature on hairdressing tools;
• processing is carried out in just 10-20 seconds;
• incredible effectiveness in combating even the most dangerous types of bacteria and viruses (for example, hepatitis);
• instruments remain intact for more than one season - temperature does not affect the instruments in any way;
• uses energy economically;
• work without interruption allows you not to stop the work of your salon and receive a flow of visitors;
• mobility of the device and its small size;
• unique and modern appearance;
• the price for such devices is within reason, if you don’t buy too sophisticated models.

However, for some masters, shortcomings were also identified. They do not affect work so much, but still sometimes appear:

• compactness played into capacity. If your salon is too large, then you are unlikely to stop at one sterilizer;
• processing exclusively metal tools - the plastic will simply melt;
• the handles of the same scissors remain at the top without the influence of the device. The result is that only the working surface is processed, and not the entire bag.

Conclusion: for most small salons or studios, the device is simply wonderful. For the network, you should think about something else, more stationary and larger.

How to use a ball sterilizer for manicure tools

We will divide the complete instructions for the sterilizer into several stages: first connection, use, storage and others. After all, each of them has its own characteristics that are worth talking about.

Ball sterilizer - instructions for first use

technopomosh.com

First of all, we get acquainted with the manual (operating rules that come with the machine). Before turning on, fill the device with balls, close the lid and plug into the outlet.The instructions for the ball sterilizer indicate that you cannot open the lid while heating the quartz elements - you can get burned!

The unit is turned on by pressing the start button. Some models have an additional sensor. It notifies the user that the system is turned on and heating has begun.

The system heats up to approximately 250 Celsius. How to understand that it is ready: time it for exactly 15 minutes or watch the indicator - if it goes out, then everything is ready for use.

Now you can carefully open the lid and throw in all the manicure equipment. For complete processing, 30 seconds are enough, after which you should carefully remove the treated instruments. The lid closes and the sterilizer is turned off from the network.

Instructions for storing a ball sterilizer for manicure instruments

The whole procedure consists of two parts: proper care and storage of the device. It is best to keep your device in its original box. The room should have low humidity parameters and average air temperature.

Before placing the sterilizer in the box, inspect it:

• whether it is disconnected from the network;
• Is everything okay with the plug?
• Is the device cold?

Maintenance and repair are the most important components of the continuous operation of a ball machine. All procedures must be carried out by specialists. All you need to do is the following:

• After a working day, the body and working part are wiped well with a rag;
• If you notice damage to the cable or other parts, immediately contact the service center. Until this moment, connecting power is strictly prohibited!

Precautionary measures

You can't go anywhere without special safety rules. So we tried to highlight a few, in our opinion, the main ones:

1. Before cleaning the device, make sure it is cold and not plugged in.
2. After cleaning, wait a couple of hours and only then connect the sterilizer.
3. Systematic cleaning is carried out even when the device is not operating on a regular basis.
4. We only remove the container, body and lid.
5. If liquid gets inside the device, wait until it dries (if only a couple of drops got in) or take the device to service.
6. Do not use cleaning chemicals when washing the machine. Just a damp cloth or towel.
7. After completing all work, wipe wet areas with dry wipes.
8. If you have any difficulties with maintenance, look at the instructions or write to us in the comments. We'll solve everything!

How to use a sterilizer - first you need to buy it correctly!

All devices are similar in the method of disinfecting the instrument. But the purchase is influenced by several operating factors that should not be ignored:

• the maximum heating rate of the system must be at least 250 degrees, otherwise the manicure devices simply will not be sterilized;
• assembly material – only metal or fire-resistant plastic;
• Rubber feet or other strong fasteners obviously will not hurt, but will only benefit the stability of the device.

Purchases should only be made in stores that specialize in manicure equipment! They have all the licenses and assurances about the quality of the product, which may not be the case in regular chain stores. Before paying, fully check all documents, warranty and return policies (just in case).

That's all! We went over the main points on how to use a manicure sterilizer with balls, and provided some tips on purchasing and care.If you have other tips or recommendations, we will be happy to read them in the comments under this article. All the best and good luck!