The phone does not see the router, what should I do?

The occurrence of malfunctions during the operation of the device is a natural phenomenon. When a phone interacts with a wifi network, a common occurrence is loss of signal. The written article will contain explanations: what to do and how to deal with the problem.

Why can't my phone see the router?

To accurately determine the problem, it is recommended to first determine the source. It can be hidden both in the cellular equipment itself and directly in the router. In the latter option, it is advisable to try connecting another device. If it also does not recognize the signal, then the problem is definitely in the wifi itself. To test your mobile device, you should find another access point and also start pairing. In a negative result, it will become clear where the defect lies. The most common situations form a whole list:

• Crashes or viruses;
• The router either froze or failed on its own;
• The wifi communication function is not activated;
• Broadcasting a network on someone else's behalf;
• Power loss;
• Pre-configured parameters are incorrect.

Possible causes and solutions

Each option requires an individual way out of the situation. Thus, it is recommended to review the possible defects and methods for eliminating them:

• It often happens that a phone malfunctions, namely in its firmware with an unestablished network. Then it’s worth rebooting the invention.If you recently flashed the system and the problem remains, it is useful to repeat the procedure again.
• We especially need to approach the situation with home Internet. If the unit does not see exclusively its own point, it is worth thinking about the unreliable indicators of the router. To solve this, you first need to make sure that the distribution function is activated. Accordingly, you should go to the “wireless network settings” tab and check the boxes next to the first two lines. After this, both standard broadcasting and ssid broadcasting will be enabled. If this scheme turns out to be without results, then it is advisable to change the channel and region in the section.

Attention! If the frequency characteristics of the equipment are different, interaction will not occur.

• Thus, you need to correctly configure the frequency range. Most often it is the default. To check, you need to go to the settings of your cell phone, and then go to the wi-fi window. There you can select the required value.
• When you notice that the unit is connecting and then disappearing again, it is worth checking the quality of the signal. It is important to set the highest value on the sensor power. To do this, you need to use the console and open “advanced settings”. There, mark the “high” parameter in the first line.

Reference! Finally, save the changes by clicking the appropriate button. In addition, it is recommended to install the structure away from household appliances to avoid possible interference.

• It is important to look at the phone feature that involves hiding a point with a low signal. Perhaps home Wi-Fi falls into this category. You need to go to the menu of your mobile device and uncheck the Internet section “do not use a weak connection.”
• As for the problems with the router itself, these are damaged firmware or regular crashes. In this case, you need to reset all possible values. If defects also occur, you will have to contact the service center.
• When the device does not detect other routers, the source of the problem may be a malfunction of its built-in module. In this case, it is best to equip the equipment with a new motherboard.