RITMIX voice recorder: operating instructions and manual

The Ritmix voice recorder allows you to conduct both open and hidden recording of a conversation, for example, during a meeting or interview. To get the best quality possible, you need to properly configure and position the device. The instructions for the Ritmix voice recorder, described in this article, tell you how to do this.

Battery installation and connection

The instructions for the Rhythmix voice recorder begin with a description of the process of installing batteries and turning on the device. The main stages are:

1. Be sure to turn off the recorder and do not turn it on until new batteries are installed.
2. Open the cover with the compartment where the batteries are inserted.
3. Insert them, observing the poles.
4. Close the lid.
5. Press and hold the “Play” button for a few seconds.
6. When the message “On HOLD” appears, slide the lock switch and turn on the recorder again
7. Set the time by pressing the “MENU” button.

How to make a recording

The instructions for the Ritmix RR 150 voice recorder focus on how to record:

1. Press the REPEAT button as many times as necessary to select the desired folder.
2. Set recording mode settings.
3. Select microphone sensitivity (high or low).
4. Indicate the signal source (microphone or line input).
5. Select whether to enable voice recording - on or off.
6. Set up a recording mode - this can be a meeting or an interview.
7. Test record for a few seconds to see how well it will sound.
8. Perform a master entry (up to 99 in total in each folder).
9. When the memory is full, you will see a “FULL” notification on the display. In this case, some of the files should be transferred to a computer or other device.

Different recording methods

The voice recorder allows you to record in several ways - through a microphone, from an external source and recording a telephone conversation.

Through the microphone

In this case, proceed as follows:

1. Press the “REPEAT” key several times and select the folder of interest.
2. Press the “REC” button.
3. Mark “V” in the settings.
4. Place the device so that the microphone is as close as possible to the sound source.

From an external source

In this case, you will need external equipment, which is connected to the recorder using a cable according to the presented diagram.

The instructions are:

1. Select INPUT and L (line-in connection).
2. Press the “REPEAT” key.
3. Select the folder in which the file will be saved.
4. Press "REC" to start recording.

Recording a telephone conversation

The main stages are:

1. Connect the model to the phone using a USB cable and a special adapter according to the diagram presented.
2. In the menu, set the recording source and select “V”.
3. Press “REPEAT” and select the appropriate folder.
4. Start recording with the “REC” button.

The recorder should only be used in positive temperatures; do not record outdoors in cold weather. It is also recommended to avoid dripping onto the surface of the housing. Thanks to this, the device will last a long time, and the recordings will be of high quality.