How to clean the photoconductor drum of a laser printer yourself

The image drum is the internal part in the laser printer cartridge that prints. Drum life is about 10,000 pages. But due to poor quality toner and high humidity in the room, the roller begins to print pages with defects.

What you need to clean the laser printer drum

Before you begin cleaning, you need to consider chemicals. There are a large number of special liquids in stores that are designed for care. But you don’t have to spend money on them, but simply wipe the drum with lint-free cleaning cloths or microfiber.

Attention! Do not use products that contain solvents, ammonia or alcohol to clean the drum.

Important points before cleaning

To clean the device yourself, you need to follow a number of steps. First, the front panel is removed, but we must not forget that in certain devices this is done using a special tool.

Also, do not forget to cover your work area with paper before starting work, as paint particles will begin to fall out of the toner.

Important! If paint gets on the skin, you must immediately wash this area of ​​the body.

Cleaning the laser printer drum: step by step

To carry out the process yourself, you need to follow the following step-by-step instructions:

1. Disconnect the equipment from the electrical outlet.
2. Open the housing panel.
3. Carefully remove the cartridge unit.
4. To prevent damage from static electricity, do not touch the electrodes.
5. Press down the green flag and remove the cartridge.
6. To avoid deteriorating print quality, do not touch the parts.
7. Place the printed sheet of image in front of the drum and pinpoint where the print quality is poor.
8. Rotate the shaft gear while looking at the photosensitive surface.
9. Once you have identified contamination on the surface that matches the print pattern, carefully remove it.
10. The image drum is sensitive, so do not touch it with your hands.
11. There is no need to clean the surface with sharp objects.
12. When cleaning the shaft, do not scrub it, otherwise this will damage it.
13. Push the cartridge back firmly until it clicks into place. During correctly performed actions, the green flag will automatically rise to the top.
14. Insert the unit back into the printer.
15. Close the housing panel.

During cleaning, you must be extremely careful not to damage it. If you do not have the necessary skills, then it is advisable to seek help from a repair shop.