How to connect a modem to an Android tablet

Some tablet computer models are not equipped with a special slot for SIM cards. Therefore, they cannot perform the function of accessing the Internet, which is so necessary in modern living conditions. In this case, users are faced with the question of various ways to solve this problem.
Of course, it remains possible to connect via a wireless Wi-Fi network for free access. But in this case, you will have to constantly look for a synchronization point or purchase a router for home. All this is very inconvenient, since access to the network will be limited. In this case, you can use a modem.

We will tell you how to connect a modem to an Android tablet.

How to connect

Thanks to this method, you can provide free access to the Internet on your device. But before you start using it, you need to install it correctly. For convenience, use the step-by-step connection plan.

• Buy a 3G modem with the ability to use a built-in SIM card.
• If you have a special USB input, you can directly connect it to the tablet.
• If the connectors do not match the wires, you canBuy a special adapter for modern device models.
• After this, the program should write a notification that a new device has been detected.

IMPORTANT! If, when using an adapter, the equipment does not recognize the connected module, most likely you have an outdated model that does not support this method of pairing equipment. If possible, buy a new version of the tablet from the store.

How to make the necessary settings

After connecting the equipment correctly, you need to configure it correctly. This will allow you to use all the capabilities of technology.

To configure, you will need to complete the following steps in the order listed.

• For the tablet to recognize the device, you must install the 3G Modem Mode Switcher program.

IMPORTANT! There are other utilities for settings. If you decide to choose such a program, download it only from trusted official sources.

• Do everything follow the installation wizard prompts in the dialog box that opens.
• After correctly downloading and installing the application on your tablet computer log in to it.
• Then select the value you are interested in for the device operating mode. In this case, you will need to set the “modem only” parameter.