The charger is disconnected from the laptop, what should I do?

Every device tends to break down over time. However, this is not a reason to say goodbye to him. It is quite possible to independently identify the source of the defect and eliminate it. Therefore, this will be discussed in this article. So, what to do if the charger goes out?

Finding the reason

You can identify one of the types of problems. Accordingly, the approach to each will consist of an individual sequence of actions.

The cable itself is coming off

To eliminate or smooth out the problem, there are three options for the development of the event. Namely:

• Solder. Since the wire is constantly exposed to movement, its contacts inside tend to branch out. Because of this, you have to remove the outer shell and cut off the damaged area. After which it is necessary to fasten the fresh contacts directly to the plug. Manipulations are carried out with the interaction of a soldering iron.
• The next method is to use electrical tape. So, the power supply should be wrapped around the product 5-7 centimeters from the middle. REFERENCE! The entire structure can be covered with 1-2 layers of tape on top.
• As a last resort, you can always purchase new equipment.

Problems with the socket connector

There are also two cases worth considering here. The first is when the described part does not hold up well, but the equipment is in working condition. Then it is recommended to reproduce the repair as soon as possible.You just need to solder the hole for the power supply. If the plug itself does not attach and the invention does not turn on, then one of the system components in the laptop is most likely burned out. This usually occurs due to a short circuit subsequently causing a fault. In any case, you will have to replace the power connector.

To do this, you need to study and completely disassemble the computer. Then remove the motherboard from it in order to later solder the output in it. Of course, it is best to turn to specialists, since this stage requires special knowledge and skills. Remember that this process is labor-intensive and, if done incorrectly, can lead to the most serious consequences.