How to open a disk drive on a laptop

A device that allows you to read and write information directly onto a medium, although not in great demand in the modern world, is, however, considered necessary in some situations. Thus, the user needs to know the methods that will help him open the mechanism. They will be discussed in this article. We will also consider possible obstacles in this matter and options for eliminating them.

How to open a disk drive with a button

For most laptop models from different manufacturers, the opening can be reproduced thanks to a certain pressure. Often the product is located on the side or on the surface of the disk drive.

Attention! It is recommended to first verify the availability of the structure. To do this, it is advisable to refer to the equipment documentation, which contains all the characteristics assigned to it.

In addition, you can consider the body of the unit. There should also be a rectangle labeled “DVD”, and in the task manager, in fact, its version should be indicated. So, if you have found the relevant information, then you should proceed directly to the main process - discovery. As you know, the location varies depending on the computer model. So, most often there are: the area located next to the retractable tray; optical drive cover; side part (usually the right side) of the invention.In any case, you just need to clamp the part for a while and wait until the drive comes out. This will take a small number of seconds - from one to three. The key is easy to find, since it is indicated by a special symbol such as an arrow or a dash.

Why doesn't the drive open when I press the button?

Every technology tends to fail, so any malfunction is a natural occurrence. It is not necessary to resolve the situation by sending it for repairs. It is likely that the user is able to cope on his own. However, this requires appropriate knowledge and skills. So, of course, it is impossible to find out the source of the defect in advance. But often the problem turns out to be temporary. Therefore, you just need to restart your computer and try again. If it doesn’t work, then gradually move on to the following manipulations:

• The first step is to restart the laptop. We can say that due to this action, all program parameters and commands in the control will be reset.
• Most likely, in a hurry, you installed the disk incorrectly. Consequently, the contact has closed inside, and this will require little physical effort. To do this, arm yourself with a sharp object. It is desirable that its end is slightly blunt. Thus, it is worth trying to clamp the part and at the same time help it open using, for example, a knife. Here it is important not to overdo it, since it is possible that the disk inside has burst and crumbled.
• It also makes sense to consider the situation in which a mechanical problem has occurred, namely, broken gears. But they are responsible for extending the compartment, which is required for installation.It is for such cases that the developers have provided for the implementation of the function through an emergency exit. To do this, the owner needs to acquire a paper clip in order to manually set the device in motion. You can find a small hole on the front panel. You need to insert a thin material into it (a needle is also suitable for surgery) and apply light pressure. As a result, the design should automatically work. Thus, the long-awaited stage will occur.
• Do not forget that the electronic board may also be faulty.
• In some cases, malicious software blocks the CD on its own. Therefore, it would not be superfluous to update anti-virus platforms and check the system.
• Eventually, the Windows operating system may lose communication with the drive. This usually occurs due to various errors in the OS. In this case, even a reboot will not help correct the situation. It is necessary to completely disconnect the equipment from the power supply and remove the battery for a few minutes. Then return the spare parts to their original location and bring the laptop into working condition.

How can you open a disk drive without a button?

When using standard software, activation of the technology is also possible using software methods. For example, below is a sequence that is sure to power a DVD:

1. First you need to go to “my computer”. If you are the owner of version 8 or 10 of the OS, then instead of “my” you will have “this”.
2. In any case, the folders will be available. From them you should select the drive icon and click on it with the right mouse button.
3. After which a window will appear in which you can mark the “extract” line. Usually it is in the middle of the entire list.
4. Finally, the tray itself must crawl out to a minimum distance.If this does not happen, you will have to turn it off again, turn it on and start the described algorithm right from the beginning.

For some users, the column for the required product is not displayed. Then you should complete the following points:

1. Using the secondary key on your mouse, point to “Start” and click on the title “Command Prompt (Admin)”.
2. After this, you can insert the job “HKLM\System\CurrentControlSet\Services\atapi\Controller0” /f /v EnumDevice1 /t REG_DWORD /d 0x00000001” and then press enter.
3. The very last step will be to reboot the invention. So, after all the above operations, a CD should appear in the directory.

In addition, the product described may not exist at all. For example, it cannot be found on some Asus representatives. In this case, you need to try a separate method that uses the keyboard. At the very top, where the functional tools are located, you should find the one called “extraction”. If it is present on the panel, then it is important to hold it in combination with “Fn”.

Reference! If the device has blocked the output, then it is better to consider two options for the outcome of the event. The first involves closing processes in the task manager, and the second involves using the “Unlocker” application.