How to disable the built-in video card on a laptop?

If you want to spend a long period in front of your own computer, it is necessary that the battery lasts for the time spent. It is recommended to remove the external graphics adapter. In this way, it is possible to create an increase in the productivity of the unit. However, the question arises as to how to do this. In this article, we will look at options for turning off all types of cards.

Is it possible to disable the built-in video card on a laptop?

Most modern laptops are equipped with two types at the same time:

• Integrated.
• Discrete video cards.

Due to the first of these, the laptop is switched between adapters to implement the simplest functions. And thanks to the second, games and applications that require labor are launched. Of course, presented representatives can be disconnected to resume high speed interactions. This can be done in several ways, which we will discuss below in the article.

How to disable the integrated video card

It doesn’t hurt to reproduce the preparation for the main process in advance. It consists of checking the presence of a discrete card. Namely:

• First, unplug the power from the outlet.
• Then remove the case cover to gain direct access to the motherboard.
• The slot can then be defined. Seal the connector latch and insert the card. If necessary, you will have to fix the structure with bolts.
• From now on, you can reassemble the components and connect the monitor to the appropriate connector.

Once connected, you can boot the equipment. To proceed with the operation, it is recommended to adhere to the following options.

Disabling via Device Manager

The most common way is to counterfeit the internal capabilities of the Windows operating system. So, you should perform a certain sequence of actions:

• First of all, just open the “device manager” to view the components installed in the structure. To do this, right-click on the “my computer” folder and find the “properties” column in the list that opens. On the right, accordingly, the necessary link will be located.
• Now you can go to the “video adapters” section.
• To determine the variety, it is best to search for a description of the element via the Internet.

Attention! Often this role is played by Intel.

• After which you can begin to eliminate it. To do this, click on the desired device and in the area that will be available, select the “turn off” option.
• After confirmation that the component will be turned off, it is advisable to close the existing tabs and reboot the system.

Disabling using special software

Along with installing drivers, certain software is usually installed. So, if we are talking about Nvidia, then it is a good idea to stick to the choice of the Control Center application. And when using AMD - Catalyst Center.Of course, a separate manipulation algorithm is assigned to each type. Regarding the first one:

• You must first launch the platform.
• Then go to the “3D parameters” tab.
• There, select the “manage 3D settings” paragraph and open the “software settings” area, which is located on the right side of the monitor.
• You can now set the application exclusively for an external component.

AMD owners should do things a little differently:

• First also activate the utility.
• Next, click on the line called “switchable graphics adapters.”
• After the transition, a window will open in which you will need to select an element to use. In this case, we select “high GPU performance” (in some models it is probably called “high-performance process”).
• As a result, you will notice that after saving all the changes described above, the mechanism will automatically launch various applications without using a graphical solution.

Disabling drivers

To achieve the result you will have to implement the following points:

• It was already mentioned earlier how to contact the dispatcher. So, through it you will need to go to the “services” layout, and then, at the bottom of the section that opens, the “open” column will be located. Therefore, go along it.
• So, you will have a certain list in front of you, from which you should find and select “video adapters”.
• Then go to the indicators and select “exclude”. In addition, you can roll back, update, and also delete it.

Of course, in addition to what has been described, it is recommended to reproduce updates in a timely manner and change the old version to a more recent one.Often such a decision changes the situation in a positive direction.

Disabling using BIOS

The most reasonable method is to disable it through the BIOS.

Reference! The procedure is not possible on all laptops. This is explained by the fact that on some models there is no important criterion at all in the mentioned settings.

In addition, the order may differ significantly for everyone, so it is impossible to write a single instruction for use. Because of this, it is necessary to note the main points:

• Most often, the desired layout is located either in “Advanced” or in “Config”.
• To disconnect, you will need to select “Integrated Graphics”, and then “Disabled”.

Important! Further work in the algorithm will be given based on the operation of Asus.

• So, after activating “Advanced”, you should go to the window called “System Agent Configuration”. There, click on the “Graphics Configuration” subsection.
• Subsequently, it is worth setting the “auto” indicator opposite the “Primary Display” line so that automatic switching occurs.
• Finally, all that remains is to save the changes using the “F10” and “Y” buttons.
• In order for the configuration to take on a new look, you need to reboot.

Do not forget that with the distinctive features of the BIOS, you need to look for subparagraphs that are similar in meaning. For example, Onboard GPU or Peripherals. In some situations, the built-in CPU may become disconnected due to the “Disable” selection.

How to disable a discrete video card

Several methods can also be distinguished in this topic. If you work again with BIOS, you will need to follow the steps:

• When loading is in progress, click on “delete”.
• Then expand the “Video Options” layout and select “PCI Video”. It makes sense to indicate “Disabled” in front of it.Such an indicator will transfer the described element to a passive state.
• Most likely, there will be an automatic transition to another card. Then you additionally need to hold down “F10” and restart the laptop.

If nothing has changed, then try selecting “Use Default” and confirm the step. As a last resort, you can turn to software. In this case, it is necessary to implement the following stages:

• First you need to launch the installed software. Nvidia Control Panel or ATI Vision are often used as it.
• In the menu, all that remains is to check the box that indicates the element.
• In automation, it is better to configure auto-switching.