What to do if water gets into your headphones

Headphones make the use of a mobile device more comfortable, and they are a necessary component in the player. If used carelessly or in unfavorable weather conditions, the device may become exposed to large amounts of moisture. With timely and correct measures, the problem can be easily eliminated.

First steps if the headphones get into water

If water gets into the headphones, prompt action must be taken. In most cases, the device can be restored while maintaining functionality and sound quality.

If the device falls into a bathtub, puddle or toilet, first of all, you need to quickly remove the headphones from the water. A mandatory step after removal is to disconnect the device. The headphones themselves should be pulled out of the connector.

The next step is to remove moisture. This procedure must be carried out on weight. The wire is carefully straightened, the ear holes are directed downwards. The headphones need to be gently shaken to remove any excess liquid trapped inside the case. The surface itself should be thoroughly wiped to collect water. A soft absorbent material is suitable for this. This can be a flannel or terry rag, a multi-layer paper towel.

Drying the accessory

An important point is drying the headphones. Experts recommend drying the accessory in a disassembled state, as this will facilitate complete removal of water. It is very difficult to cope with such an operation without the appropriate skills. It should also be noted that not every headset can be disassembled.

If the device can be disassembled, each component is thoroughly wiped with paper or a soft absorbent cloth. The membrane must be carefully inspected under bright light. Water stains can negatively affect sound quality. Cracking or noise will appear, and the volume quality may decrease significantly.

If there are streaks or drops, the surface should be carefully wiped with soft paper. Actions must be careful, as sudden movements or strong pressure will lead to failure of the product.

ATTENTION! You should avoid using a hair dryer, as the air flow can dry out the inner membrane. This will cause sound distortion when used.

After carrying out the above steps, the headset parts should be left for several days. The headphones can be placed on a rag or paper towel and turned over periodically. The paper will absorb any remaining moisture that has penetrated deep into the device.

REFERENCE! In order to speed up the process, the headphones can be placed near the battery. For example, put them on the windowsill. Smooth waves of warm air will have a positive effect on the result.

If it is not possible to disassemble, the membrane can be seriously damaged by water stains. It all depends on the speed of action after moisture enters and the quality of drying.

If the headphones have been dropped into food or washed, disassembly is necessary.All components should be washed thoroughly to remove any food or detergent residue. Drying is carried out using a similar method.

What to do with the headphone jack if water gets into it

In most cases, when headphones are damaged, water gets onto the player or phone. The device must be immediately removed from the water and the battery removed. Remove all stains and drops from the surface, and thoroughly wipe the body itself. A paper or soft towel is useful for this. The device can be shaken several times so that any drops that fall inside end up on the surface of the case.

Drying also takes several days. During this period, it is prohibited to turn on the device, insert the battery, charger or headphones. It is better to refrain from cleaning ports with cotton swabs. Cotton wool may remain inside the connectors, and hard parts will damage the contacts.

A hairdryer is useful to remove water inside the case. The household appliance should be connected at minimum speed. Collect excess moisture with paper or cloth. After all operations, the device should be left for at least three days until completely dry.

Moisture can cause oxidation of the connector contacts. Alcohol is suitable for removing plaque. When working, it is better to abandon cotton wool and use a bandage. A thin wooden stick will be useful as a rod. The material should be selected with optimal thickness so that the finished instrument can be freely inserted and removed from the connector.

You need to wrap several layers of bandage around the base of the stick and dip it in alcohol. The excess must be carefully squeezed out so that no moisture remains inside. After thorough treatment, leave the device until completely dry.

ATTENTION! A hairdryer is useful to speed up the process.

After all operations have been completed, you can check the phone or player for functionality. The battery is inserted into the socket, the device itself turns on. You can also immediately check your headphones. If, after connecting, the device does not recognize the headset, consult a specialist.

Headphones are a must-have addition when purchasing a mobile device or mp3 player. If the product gets wet, its functionality may be significantly impaired. Following the recommendations and taking timely actions will help resolve the problem.