How to turn off wireless headphones

Science and technology do not stand still. Just recently, it was crazy to look at a person talking through a wireless headset without holding the phone to his ear. Not long ago, wireless headphones appeared. As always, Apple was the trendsetter. The absence of a wire is very convenient and practical. The user can get rid of the eternal problem that the wires get tangled. At the same time, the eternal problem with the lack of wire length is solved.

How to turn off wireless headphones

Bluetooth headphones are very tiny devices; as a rule, they have no more than three control buttons. Their functionality can be combined. The choice of the desired function depends on the selected pressing combination, as well as on the duration. Not every model has a shutdown button. To turn off the device, you need to press the power button and hold it for a few seconds. However, it is not always possible to turn off the headphones in a standard way. This is often caused by some kind of glitch. In any case, the problem must be dealt with.

How to force turn off wireless headphones

There are at least two situations when you need to forcefully turn off your wireless headphones. In the first, when you disconnect the headphones, the “Headphones” mode continues to work on the device. The second case is somewhat more complicated when the headphones themselves do not turn off.

Headphones mode. Standard functionality of Apple devices. This makes it possible to adjust the ringer volume while the user is listening to music. If headphones are connected, the volume is automatically reduced to half. If you turn them off or remove them, another mode is automatically activated and the sound volume increases to one hundred percent. It's actually very convenient.

However, the automation often fails and you need to think about how to turn off the headphone mode. If it turns on on its own as soon as a connection is detected, then it should exit this mode on its own.

Initially, you need to understand why the device can behave this way. If the headset mode remains enabled, the user will not be able to hear incoming calls. Essentially, it turns out that the smartphone continues to send sound to the disconnected headset, but there is no sound on it itself. There can be quite a lot of reasons. Let's list the main ones:

• the device is dirty;
• the connection connector is damaged;
• system failure;
• water got on the smartphone;
• There is high humidity in the room.

In order to accurately determine the cause of the malfunction, you will have to go through them all. But often you can cope with the situation on your own.

There are several ways to disable Headphones mode. First, you can try rebooting the device. To do this, you need to connect your iPhone to the charger and restart it. If this method does not produce results, then you need to repeat everything, only select Hard Reset. To select this mode, you need to hold down the volume and power buttons while the power is off; as soon as the logo appears, release the buttons and click Had Reset in the menu that appears.

In a situation where the headset itself continues to work, although they are disabled in the smartphone and pressing the power button does not help, it is recommended to completely discharge the battery. As a rule, after this everything starts working normally. If this does not help, then it is better to contact a specialist.

Reset

Often, in order to eliminate problems with the headset, namely to disable them, you need to reset the user settings to factory settings. To do this you need to do the following:

1. Turn on your smartphone and wait for it to load.
2. Go to the “Settings” menu, then go to “General” and “Reset”.
3. In the window that appears, click the “Reset all settings” button, and then “Erase iPhone”.
4. After this you will need to confirm the operation. To do this you will need to enter your AppleID.

As soon as the code is entered, the device will reboot. Then you can re-enter the data and evaluate the result.