How to turn on wireless headphones

Every year, headphone manufacturers create updated models. Accordingly, the operating principle may also change. On this basis, a lot of questions arise about connection. That is why in this article we will try to understand in detail the important aspects that you should know when connecting a particular device.

Ways to pair headphones via Bluetooth

Of course, the developers took care of future users and created the simplest steps for reproducing sound through the unit. Thus, you just need to adhere to the following instructions:

1. The first step is to activate the Bluetooth function on both structures. On headphones this is done this way: press the button and hold it for about 8 to 10 seconds. After which the indicator should blink. As for the phone, this is the process of finding a certain item in the menu, which would indicate the inclusion of the desired task.
2. Then you can search for active equipment. This is usually done automatically. You only need to point to the desired line with one click.

This concerns the question “how to turn on bluetooth headphones”.However, it is worth understanding that the above is the main option. The outcome of events will directly depend on what base is installed on the cell phone.

Features of connection on Android

So, let's look at how to connect to the presented database. To do this, follow the procedure described below:

• The first step is to contact your smartphone directly. On it, go to the “settings” section.
• There you can easily find a line with the name “bluetooth”. Accordingly, it must first be activated. To do this, click on the switch located in the upper right corner.
• Further. You can start turning on the wireless earphone. You can find a method in the instructions that came with it upon purchase. The most common way to do this is to press the power button for 10 seconds.
• After which a “search” window should appear on the device to scan available devices.
• Now you can find the corresponding name and mark it for pairing to begin.

ATTENTION. Some models may have "protection". To remove it, you must enter a special code, which can also be viewed in the instructions. Thus, further actions will occur automatically.

Connection features on iOS

By and large, there are no distinctive features from the previous method. The principle is almost the same:

• First you need to go to the operating system settings.
• Next, switch to the “bluetooth” section. In the same right corner there will be a button that you should click on.
• Then it’s the same: we look for the desired device name and join. Don't forget about the possible need for a PIN code.

It’s also worth understanding a really common problem among users. Namely, that not every iOS will be able to support certain technology profiles. This means that you may have to update and install the entire system directly. In addition, the equipment usually quickly consumes its own charge, since quite a lot of energy is consumed.

REFERENCE. It is possible to perform the same manipulations in order to connect the network with other devices that operate with Bluetooth support.

How to connect headphones via Bluetooth to a laptop?

It is worth noting first that not every laptop is able to connect via this technology. Therefore, first you will need to check the device. If, however, your unit does not have this capability, you will have to purchase an external module in advance, install special drivers and only then use it. Actually, the main process starts as follows:

• First you need to click on the combination windows + R. After this, a window will appear in the line of which you must write “devmgmt.msc”. Then, to save the information, click on “ok”.
• If the outcome of events is correct, a list will appear in which you should find the desired function and the names of your devices.
• Now that the material has been checked, you can move on to the main stage. Namely: mark the power button directly on the headphones and hold it until the indicator starts to light up.
• Next, in the lower right corner of the monitor you need to select the Bluetooth icon and click on “add device”.
• You will have access to a list of possible structures, where you need to find your unit and continue the procedure.
• In conclusion, you just need to follow the prompts that will be broadcast. When prompted for a verification code, you will need to enter “0000” as this is considered the standard password.

How to connect wireless Bluetooth headphones to a computer?

Each option has its own common features in the process, so to pair a PC with another device, you should follow the sequence of actions below:

• As elsewhere, you need to turn on the headset using a special button. The time to continue pressing usually varies from 10 to 15 seconds. After which the unit will be available for use.
• Now accesses the host hardware directly. You need to find the icon in the system tray. Location - bottom corner on the right side of the desktop.
• Check "add device". The computer will automatically begin searching for possible equipment and, accordingly, will offer you a list with their names. All you have to do is select the desired unit and proceed to completion.
• The last step will be one click on the “next” button.
• Further, everything depends, as always, on the design model. Again, it may be that there is a confirmation request.

IMPORTANT! This applies to both a laptop and a personal computer: if there is no connection, you will need to install a driver.

Of course, this is usually done independently from the software database, however, errors can also occur. Therefore, you will need Windows Media Center. In addition, it is recommended to double-check the documentation for the equipment, since you may have entered the wrong password. Do not forget that errors can also be eliminated by restarting the PC or by turning off/on the headphones.

At what distance can Bluetooth headphones work?

If you have previously used this function, you have probably noticed that at a certain distance the device works better or worse. Indeed, with line of sight, the equipment can recognize another at a distance of up to 50 meters. Speaking about the location in enclosed spaces, it is worth understanding that the available length is significantly reduced, namely from 10 to 20 meters. If we believe modern manufacturers, we can mention that some devices are capable of providing a range of up to 100 meters. Thus, it is important to understand that everything directly depends on the model and its developer.

REFERENCE. If we compare the old types with the updated ones, it is clear that the difference between them is quite large, and it is primarily recognized in the characteristics.