How to clean your headphone jack

You can often notice that the headphones begin to malfunction. Of course, this is not an indicator that it’s time to throw them away. First you need to figure out the source of the problem. And most often, various types of pollution can play this role. This is exactly what will be discussed in this article. Let's consider not only cleaning methods, but also find out the obstacles that may interfere with achieving results.

What kind of headphone jacks are there?

First you need to decide what type of nest it is. Consequently, several models are distinguished:

• Mini-Jack is perhaps the most common type. Despite the fact that it appeared quite a long time ago, to this day it operates all over the world. It is worth mentioning that all personal computers, laptops and cell phones are equipped with this output.

REFERENCE! Everywhere has its exceptions. Here is the refusal of the manufacturer Apple to use the jack in the latest version of the device.

• Jack is also considered a fairly standard product. However, unlike the previous option, this one is most often used directly for professional equipment. This includes inventions such as electronic musical instruments.
• Micro-jack differs from mini in that the connector is 2.5 millimeters in size.
• As for usb, it is rarely used. Most often it is used by players. This is because the representative has many buttons that require separate configuration.

Thus, depending on the manufacturer and model of the structure, you can find various types of connectors.

How to clean a headphone jack

In the example, let's look at a method for cleaning a mini-jack with a 3.5 mm hole. In order to achieve results, you should adhere to the following sequence of actions:

• First you need to arm yourself with a toothpick, a small piece of cotton wool, and a little alcohol. Don't forget to turn off your mobile phone first.
• Next, the material should be moistened in liquid.
• After which you can insert the resulting product into the recess.
• At the end, it remains to perform rotational movements several times.

Thus, you should repeat the manipulations until the cotton wool is clean.

REFERENCE! If necessary, it can be changed. In addition to this method, there is another:

• To do this, you will need a cotton pad and a headphone plug directly. So, now we need to divide the product into two parts. Moisten one of them, which is thicker, in alcohol and wrap it around the part.
• After this, you can insert the structure inside and also scroll along its axis.

Therefore, as in the first and second methods, it is worth doing all the steps as carefully and carefully as possible.

What not to clean connectors

There are moments that, if implemented, can lead to death or just ordinary breakdown. Accordingly, we will discuss them below:

1. Under no circumstances should you use any type of water.It is better to give preference directly to industrial alcohol. It is he who is able to neutralize existing contaminants.
2. In addition, it is not recommended to use rigid parts in activities. This is explained by the possibility of causing damage to the internal surface.
3. As for using a special vacuum cleaner or a can of compressed air: it is advisable to neglect them only in cases where you have special skills and knowledge in the field of their use.

If you experience certain problems with the operation of this accessory, first you need to check for contamination. Since this reason is the most popular of all other similar ones. In this case, poor contact between connected devices can be detected. However, you can first connect the product to other work equipment, for example, to a similar smartphone or to a computer. Therefore, if the sound is not reproduced or is noisy, then the problem is most likely a clogged connector.