Modernization of an old music center

With the advent of new equipment, old devices are no longer needed, and people gradually accumulate a lot of unused equipment. But you shouldn’t throw it away; among long-forgotten things you can find those that can still be restored and given a second life by changing the body and operating principle. Today the topic for discussion will be the music center.

By upgrading older models, you can get high-quality equipment with bright and rich sound. It is necessary to use the equipment without severe external and internal damage to the body. If there is mechanical stress or microcircuit failure, the speakers will not be able to provide high-quality sound output.

How can you update your music center and what is needed for this?

If you have a little free time and a desire to restore the sound system, you can do the work yourself at home. Since modern versions use connection to and synchronization with a computer, special adapters can be used to ensure such interaction. To complete the job, you will need to purchase the following set of tools and parts:

• a special module for an MP-3 player with the ability to be built into the equipment case;
• soldering iron, flux with solder for conducting an electrical circuit and installing a module;
• additional wires for connecting to the main circuit;
• a set of screws, a screwdriver and a screwdriver;
• a sharp cutter to make a hole in the case - an adapter will be installed into it.

You can do without embedding the player inside the equipment, but in this case all the wires will remain outside and will look ugly. It is recommended to place the equipment inside and then carefully seal the slots in the product.

IMPORTANT! Follow safety precautions, prepare the workplace and use personal protective equipment.

Upgrading your music center using a plug-in module

In our article we will look at the most popular and affordable way to adapt a music center to modern requirements. Its essence lies in the use of a special removable block that provides connection between the speaker and the player. Through a special built-in module, you can regulate the operation of the system, output sound, and configure the necessary parameters.

The module itself is inexpensive and can be purchased in specialized stores or on the manufacturer’s website. After acquiring all the necessary parts and tools, it is necessary to combine the equipment and ensure their coordinated operation. This way you can breathe a second life into an old music center, and its classic style will successfully complement the interior of the room.

Module features

Before installing the module, you should familiarize yourself with the principle of its operation and features. This is necessary to select the best model and select the most suitable option for your version of the speaker system. There are both simple built-in modules and those with additional capabilities and operating modes. The main advantages of such devices:

• the ability to use a special remote control to control the system from a distance;
• versatility - suitable for any model;
• help to enhance and improve the quality of the sound supplied through speakers from old equipment.

IMPORTANT! To restore the functioning of an old music center, it is enough to keep the power supply, speakers and sound amplifier in good condition. Without these parts, the device will not output sound.

Module installation

After you have prepared all the necessary materials and tools for work, you can proceed to the main stage. Before performing all manipulations, clear the workplace, remove unnecessary things and parts to ensure freedom of movement and safety. For convenience and understanding of the manufacturing process, we offer step-by-step instructions for assembling and upgrading the speaker system:

1. Select the location where the module will be inserted. You can connect directly to the wires, but it won't look very nice.
2. Connect the power and audio output wires to the main device circuit. You need to know the electrical circuit diagram.
3. Make a special hole for the USB port. If the music center has a cassette connector, you can use it as a compartment for installation.
4. Connect the module output to the board at the center. To do this, you need to solder the wires together.
5. Connect the power supply. Turn on the music and check the operation of the device.

Now your device can once again delight others with excellent sound.To make the appearance attractive, you can seal the cuts with decorative elements.

The basic configuration is sufficient to get the job done. Most of the additional features will not be needed.