Monitor won't turn on

Since the modern world is improving every day, at this time almost every person on Earth owns a personal computer. However, even the most expensive thing can be subject to involuntary breakdown. Indeed, most have encountered such a problem when, after some time of operation, the device developed various defects. But the main obstacle is that in the presented situation the user does not know how to resolve them. Actually, in the article everyone will be able to extract useful information for themselves: what to do in a given situation. If you, when you turn on the computer, it blinks, the system unit hums, and monitor while black or writes, that the energy saving mode starts, it becomes clear that the computer is working incorrect and something needs to be done about it. The first question is why I turn on the power to the processor or systems specialist doesn't work or could there be a problem with the monitor?

The monitor does not turn on when the computer starts - what happened?

Before proceeding with the main steps, you need to make sure that the lack of performance lies precisely in the monitor. Namely, the following manipulations should be performed:

• Turn off your PC completely. Wait until the characteristic noises stop making.
• Next, press the button again to start the unit. If sounds appear and indicators are activated, then the source of the problem is really in the screen.

So, let's look at perhaps the most common case - bad contacts. Therefore, check the quality of connections of all wires not only to the motherboard and video card, but also to those products that are connected to the back of the monitor. In addition, you can try the following steps:

• Those with a DVI connector can change it to blue. If you still have no results, connect the connection to the motherboard itself. The start of work will indicate that the video card is burned out.
• The most fatal outcome is if the monitor burns out. You can try to take it apart.

ATTENTION. For people who do not understand how to do this at all, it is recommended to avoid these scams and contact a professional specialist.

The monitor does not turn on the first time

The most common reason is the accumulation of dust. There is a possibility that the iron is simply clogged with small particles of pollution. Accordingly, you should remove not only all RAM modules, but also its slots. Then run a small brush over the surface of the product to remove debris.

IMPORTANT. This must be done as carefully as possible, as there is a chance that dirt will get inside. As the procedure is completed, it is worth inserting the objects into their original place, namely the way they originally stood.

In addition, do not forget about the space where the video card cables are inserted. All possible sockets also need to be cleaned and then inserted back.

The monitor does not turn on immediately when the processor is turned on

The simplest method to solve the problem is to reset the BIOS settings. Accordingly, the first thing you need to do is turn off your computer.

ATTENTION. The shutdown is reproduced even from the network.

Next, the lid of the system unit itself opens. This is necessary in order to find the battery there. It should be located directly next to the motherboard. Thus, when removing it, it is recommended to wait a while. This usually takes five to ten minutes. When the above steps have been completed, you can safely insert all the products into their original positions and start turning on the device. Therefore, if the monitor began to extract its functions, then you did everything right, and the problem itself was resolved.

REFERENCE. It is advisable to pay special attention to searches, since most people find it difficult to find the right part. Most often it is inserted in a vertical manner, as opposed to the location in a laptop.

Monitor goes blank and won't turn on

As is clear, in each problem there are several possible outcomes:

1. Due to short circuits in the motherboard. It is believed that this is the most severe malfunction, since to eliminate it you will need to replace the product itself.
2. Indeed, there may be a defect in the monitor itself. Then it is necessary to carry out a whole diagnostics of the object. This is done by determining temperature. From simple overheating there is a wide risk of loss of performance. In this case, it is best to move the item away from the wall and place it in a ventilated space.
3. Bad memory modules. The RAM has failed. The check is carried out using special Windows applications. If, nevertheless, the problem lies precisely in it, then it will be necessary to purchase new products, since they cannot be repaired.
4. Video card. To do this, the device is connected directly either to a third-party computer or to a TV. If the required image is displayed on it without difficulty, then the likelihood of this reason can be safely dismissed.

The monitor does not turn on - but the indicator is on

In this case, follow the following action plan in the specified sequence:

• Disassemble the monitor and remove the board that is built into the power supply.
• Carefully inspect its surface. Most likely, one of the capacitors will be increased in volume or convex on either side.
• Therefore, you need to unsolder it separately from the rest and attach the updated product to its original location.
• After which you can begin to fix the wires that were previously unsoldered from it. Next, you should assemble the device the way it looked originally. Finally, click on start your personal computer. The appearance of an image on the screen will indicate a positive impact and the achievement of the desired result.

Thus, there is nothing complicated. You don't need any special knowledge or skills in this matter. Absolutely every person in need can cope.

What to do if the monitor does not turn on due to PC connection problems

It is no exception that the source of the defect lies directly in the personal computer.Moreover, it is important to understand that there are many varieties. And in order not to get confused, we will analyze each of them separately.

No connection

Indeed, the first thing that is recommended to do is to check the reliability of the product’s power connection directly to the electrical network. If the outcome is positive, a small yellow light should light up. So if it blinks, then it’s definitely not a food problem.

Damaged cable

The second most common option is the one with the cable disconnected or incorrectly connected. Here it is recommended to check the reliability of the connection, since most often users confuse the connectors, which is why problems occur. In addition, you can try to remove the product from the outlet and put it back in its original location. There is a possibility that the connecting cable has failed and is therefore not ready for use. In this case, you should connect a similar item to the same monitor. The onset of the process means that the whole problem is due to it.

Damaged connectors

To check the reliability of the suspicion, it is recommended to remove all not particularly significant objects from the system itself. This can be either USB or PCI (they are not fundamental in operation). Then try restarting your personal computer. In theory, it should turn on. This action requires the owner to gradually plug in all previously removed cables. Perform such manipulations until you find the true culprit. This way you can accurately determine the source of the problem.

Hardware damage

This moment is more serious than the previous ones.Therefore, you need to check whether replacing or installing a new video card will help. As for the product itself, there is not much difference. The main thing is that it is working. That is, here you just need to make sure that the defect is in it. If the attempt is unsuccessful, most likely the defect is in a piece of other software.

Software glitch

In such a situation, all that remains is to perform a safe reboot. To do this, you need to open the “configuration” tool, there you will have access to the “service” section. After that, it is worth noting “do not display services” there. Now you can uncheck all existing checkboxes from the proposed window. Finally, you should disable the programs that were loaded at system startup.