How to disassemble the monitor

Of course, every device tends to break down. To troubleshoot problems, sometimes you first need to disassemble the structure. However, not everyone knows how to do it correctly. Thus, in this article we will try to analyze in detail the specifics of disassembling a monitor, and also touch upon points that are strongly not recommended to be performed during the process.

Even a novice technician can perform the procedure itself (opening the monitor), but it is important that everything is done with the utmost care and precision, since the equipment is quite fragile and can be easily damaged.

What you need

Of course, before the main stage it is necessary to arm yourself with certain items that, accordingly, will be needed. Below is the list:

• Small screwdriver;
• Tweezers;
• Wedges made of wood;
• Sharp knife blade;
• Soft fabric to place the structure on. This can be a blanket, a rug, or any carpet.

Prepare the monitor for disassembly

It is important to understand that in order to carry out truly worthwhile work, you need to prepare your workplace. This is necessary so that nothing can interfere with you in the process and prevent you from achieving your goal. Thus, to begin with, the user will most likely need to remove the leg on the screen.Most often you will notice such a mount, where screws are used to connect the housing to the main part. Naturally, they should be unscrewed and removed carefully.

As for the rear panel, it is possible to use not only a small screwdriver and wedges, but also two screwdrivers. Therefore, to do this, you must first insert one of them into the hole between the back and front panels, and then carefully move them apart. The next step will be the penetration of the same product, however, in a lateral state.

With forward movements, it is advisable to penetrate smoothly by rocking both sides. Making a click will mean achieving the goal - the sash has opened. Having secured all the parts, you need to separate the sides from the latches until the back of the monitor is completely open.

ATTENTION! In order not to damage the surface, you can use certain tools that can easily be purchased in special stores.

Instructions on how to disassemble the case

After the preparation stage, accordingly, you can proceed to the main sequence of actions, which are described below:

1. The first step is to turn the monitor front side down. From the same angle, you can see the latches that need to be unfastened with tweezers, thereby moving the cover away.

REFERENCE! It is recommended to do this as carefully as possible, leaving a gap of half a centimeter to one. This necessity is explained by the possibility of damage.

1. Next, you should arm yourself with one wooden wedge and insert it directly into the hole you made. This is necessary so that the gap cannot slam shut.
2. Therefore, the same manipulations must be carried out with other places where the latches are located. How many there are cannot be predicted in advance, since each screen model has its own number.
3. When you get to the top parts, a screwdriver will help. With its help, you can crawl into fairly narrow places, while applying a little pressure on the surface.

IMPORTANT! It is at this point that the risk of damage is high, so it is highly recommended to proceed slowly and carefully.

So it’s usually quite easy to remove the lid after such fraud. Once opened, you will see a metal casing.

What not to do/not recommended

Of course, there are certain moments, the commission of which can lead to unpleasant and sometimes disastrous consequences. Thus, we present to your attention a list of the following undesirable things:

• Using a large screwdriver. Since the material with which you interact is quite fragile, heavy objects can cause various damages.
• In principle, disassembly should be carried out only when the user is one hundred percent sure of the need and the resulting utility. This is explained by the fact that most often it would be more advisable to contact a qualified master of his craft.
• The work itself must be carried out in complete safety.

ATTENTION! The device must be disconnected from the electrical source.

• It is better to perform the procedure directly on the floor. Otherwise, if the structure falls, even from any height, the owner of the equipment is guaranteed to die. Therefore, in the best situation, the monitor will have nowhere to go, which acts as a guarantee of the preservation of your structure.