How to connect ps3 to monitor

Despite the fact that a new generation of Play Statoin has already been formed, the majority still use the third series. Therefore, we need to figure out where such significant demand comes from. The game console allows you not only to play various kinds of games, but also to watch movies, listen to any music and even send emails.

Actually, the production of such a unit was stopped the year before last, in 2017. In this article, we will look at connection options, and also analyze tips that may be useful during the execution of actions.

How to connect using a cable

As you know, cables come in different types. The process itself should begin with fixing the HDMI to the monitor.

ATTENTION! In addition to the named product, DVI can also be used, however, a special adapter will be required.

If the manipulation fails, then trying to complete it is strongly not recommended. Then everything is much simpler: you just have to output the sound if there are no speakers available. This is done in two ways, at your discretion:

• With the help of "tulips". To do this, connect the cable to the set-top box as follows: both red and white are connected to the input. It is most often located on the back of the device. Then you need to go to the settings and perform a certain operation.It is necessary to mark “sound settings”. The “audio output settings” window will be available to you, where you should select the option that is at the very bottom. Therefore, to complete the stages, you need to record the data using the “X” mark.
• Optical cable. It consists in the fact that one of the ends is based in the console, and the other in the columns. After which you also need to go to the menu to configure the information. The actions are the same as described at the beginning of the paragraph.

What cables can I use?

As you know, there are several varieties of the product. Thus, we will consider each connection option corresponding to the model.

1. The simplest and perhaps most common way is to use hdmi. It most likely will not be included with the game console. Therefore, you need to purchase it yourself. To achieve the result, one end should be fixed in the product, and the other in any free connector. After which you can safely launch the console and find the channel that is directly connected to the unit.
2. Using AV. Like the previous method, this one is not particularly complicated. It is necessary to match all objects with the corresponding color.
3. "Tulips". It is also in great demand due to its high availability. It especially helps when the device is made according to the old model. The whole process consists of similar connection of one side of the cable to the product, and all cables are matched according to the shades of the connector.
4. Do not forget about such an output as SCART. Everything is the same as above in the steps described.

ATTENTION! A special adapter will be required. And also do not miss the fact that the button must be held until the beep on the second count directly on the ps3 itself.

Is it possible to connect via the network without a cable?

Yes, the answer to the question is indeed yes. However, this method requires a little special knowledge. Therefore, you are provided with a plan with actions in a certain sequence:

1. The first step is to open the folder on your PC called “network connections”.
2. Select the adapter there and disable it. Then you can go to the “properties” section.
3. In the list provided, you can find “Internet Protocol 4” and click on it, then the IP will be available.
4. You will need to specify the subnet address, save it, and reactivate the adapter.
5. The equipment itself is connected using a PatchCord cable, and the play station is turned on.
6. In the process of activating the product, you need to refer to its settings, where the speed is converted into an automatic mode.
7. At the end of the process, you should write down the IP address yourself, after which it will be the main one on your computer.

Connection recommendations

As you can see, if you are the owner of a device with a cable, then performing the described manipulations will not be difficult at all, since they are accessible to everyone, even the most inexperienced user. In addition, it is important to have certain adapters available if you need them.

Directly when setting up functionality via the network, of course, the complexity increases. However, if all these points are observed, you can also achieve an impressive result. In addition, do not forget about outputting sound to speakers, if any. It’s best to do this while setting up all the parameters, so that you have everything ready at the end.