How to turn on the microphone on your phone
Why do malfunctions sometimes appear and the microphone stops working on Android? There are several main reasons why this happens, and there are also ways to solve them, returning the functionality of the microphone. It can exit the working state completely or in certain applications, for example, Skype, voice recorder, etc. Each specific case must be considered comprehensively; sometimes it is impossible to do without the help of a repair service specialist.
The content of the article
How to turn on the microphone on your phone
There are many reasons for loss of performance; they are hardware or software in nature. Moisture may get inside the device casing and, due to its influence, the microphone will stop functioning. Possible mechanical damage. There are blockages in the hole and unsuccessful attempts to remove them using toothpicks or pins, which damage the microphone.
Depending on the phone model
The descriptions given below are relevant for devices from such companies as Huawei, Meizu Lenovo, as well as LG, Sony, ZTE, including Fly, Alcatel, Samsung, HTC Xiaomi, Nokia and many others that have the Android system installed - 9.8 ,7,6
The malfunction may occur due to a program failure; users often troubleshoot problems themselves. To do this, you need to reset all settings to factory settings.You can also flash the device's firmware. Hardware problems are much more difficult to resolve; this requires seeking qualified assistance from a service center.
If the device fails due to the ingress of water or mechanical influence, independent repair is impossible. A common case is poor-quality soldering of contacts, impacts, or falling devices. Under such circumstances, you cannot do without disassembling the gadget. For disassembly you need:
- screwdriver (phillips).
- soldering iron;
- flat screwdriver;
- rosin, solder;
- stationery knife.
To carry out manipulations:
The cover on the back is removed, the battery is removed, as well as the installed SIM and flash cards. Use a screwdriver to remove the screws and remove all the parts that cover the board. Next is a small round piece that is a microphone. It resembles a tablet and is fixed with a barely noticeable train. There is a special groove in the housing for this element. The broken part is removed. The microphone is carefully desoldered and replaced with a new microphone. This leads to the elimination of the breakdown. As a rule, it is impossible to carry out these actions yourself, as you can make more serious malfunctions that will entail expensive repairs. It is better to immediately take the phone to a service center for diagnosis and repair.
Attention! Sometimes you can deal with blockages and program errors on your own. For example, a blockage is indicated by the fact that the microphone is functioning partially, for example, poor audibility occurs or sound distortion occurs. If a similar problem occurs, try to carefully perform the following manipulations - cleaning the microphone hole, which serves as a sound catcher.
It is not recommended to clean with force to avoid serious damage. If these procedures do not resolve the problem and you are sure that there is no hardware cause, use software methods to correct the error:
- You need to go into the settings and perform a reset; before this, files are backed up to prevent their loss.
- You should enable contact synchronization and move it to a memory card installed in the device or reset it to your PC.
- The official firmware must be used to avoid conflicts between the hardware and the system.
How to turn on the microphone on your phone through headphones
A common problem is the failure of the microphone on the headphones. This problem has two reasons:
- firstly, a failure of the microphone or connector or input to the phone. Another device is used for testing;
- Another reason is that the sensitivity of the device operating through the headset is set to - 0. This does not happen often; you can change the position by going to the engineering menu. To do this, you need an access code, it is different for each specific model.
Once in the menu, you need to go to the tab - Hardware, select the line - Earphones and Mic or a similar name, it can change. Sensitivity is determined by Speech Enhancement. You need to try different settings and adjust so that the microphone in the headphones starts working. It is worth fixing this menu value in case there are problems with the sound.
How to set up a microphone on your phone
The microphone fails for a variety of reasons. For example, in case of periodic loss of sound, the solution is to ensure reliable contact.Under mechanical stress, when water penetrates the housing, an oxidation process occurs in the contact and it periodically disappears. Only specialists in the workshop can fix such a malfunction.
Attention! In order to make sure that third-party applications do not affect the functioning of the microphone, you should boot Android in “safe” mode. Then the functionality is checked.
If problems arise with sound in the voice recorder or programs and applications such as Skype, Viber, Telegram, WhatsApp, the causes of the problem can be eliminated by going to the application settings. Sometimes the application refuses to function with the existing built-in microphones and the sound is not fully captured. You may not be able to solve the problem by connecting a headset. Reinstalling programs and applications can come to the rescue. It happens that when you call a phone there is no audibility, but sound exists when using all kinds of instant messengers.
This happens when the speaking microphone breaks down. In this case, the external one functions normally. Many phones are equipped with two microphones that share their purpose or interact to improve sound quality. To diagnose the problem, it is better to contact a technician at a service center.
