The mouse does not respond well to movement on the table

Computer equipment, like other equipment, requires a responsible approach. Proper care of equipment not only improves operating comfort, but also significantly increases the service life of products and protects them from various breakdowns: both technical and mechanical. It would seem that even one of the simplest computer elements, the mouse, requires special attention from the user. How effectively it will work, to a large extent, depends on its owner.

If the mouse does not respond well to movement on the table

Despite the technical complexity of computer components, it is the mouse that is most often the first to fail. This happens due to simple wear and tear, that is, when the user does not change it for a long time, or simply does not take good care of it. This is the main reason why the mouse slows down on a computer or laptop.

The most common symptom of mouse problems is poor laser response to the surface. This may be due to either a poor surface or a malfunction of the laser itself. Therefore, if the operation of the mouse has become noticeably worse, it reacts poorly, or you have to move it several times more to get the desired result - in this case, first of all, it is necessary to test its operation on a different surface.

It often happens that people do not clean their computer desk from dust, or even eat at it, which is why more dirt accumulates in the workplace. It is because of this that the operation of a computer mouse can be severely disrupted. Even one small hair is enough for the sensor to respond poorly and react incorrectly to the surface.

In addition, many inexperienced users do not know that there is also an optical mouse sensitivity setting. For example, professional e-sports players set their sensitivity to minimum, which is why they have to make quick and short movements with their hands several times. For people who pay more attention to working at the computer, this is not necessary; they will need to set the speed to medium, or a little higher.

To change it, you need to go to the “Mouse” tab in the control panel on your computer, then select “Pointer Options” and set the appropriate speed value. Additionally, for more precise mouse control, you can set the “Increased pointer precision” parameter. When setting this value, mouse movements will be smoother and more accurate.

Important: More advanced and expensive mouse models have the ability to adjust the speed with just the click of a finger. There is a special button on the surface of the device, when you press it, the speed of cursor movement changes. As a rule, this button is backlit, the color of which changes depending on the selected speed mode. This value is called DPI. Professional eSports players pay special attention to it, as it plays an important role in precise and fast control.

Most common reasons

It is almost impossible to fully describe all existing causes of poor performance. This may be due to mechanical and technical damage to the mouse, or due to problems with the computer itself. However, it is worth highlighting the most common problems that users encounter. Typically this is:

1. Surface too rough — Mouse pads are one of the important factors for comfortable work. It often happens that the devices do not fit together completely, making it almost impossible to use the computer. In addition, many people use the device on any surface - table, book, stand, etc. With this method of operation, the device will not last long and will require replacement.
2. Presence of contamination – as mentioned earlier, you will also have to monitor the cleanliness of the house. Otherwise, computer control will be incorrect.
3. High humidity - this is a more serious problem. In this case, control will not only be impossible, but there is also a high risk of complete loss of the device. Therefore, work must be carried out strictly on a dry surface.
4. Lack of drivers – the problem often occurs when replacing a device or updating the operating system. When connecting a new device, you need to install special drivers that come with the product on the installation disk. If there is none, you need to install them manually by downloading them from the Internet.
5. Damage USB entrance – perhaps this is the most serious and difficult problem. Repairing a connector is usually quite difficult, and sometimes almost impossible. What complicates the work is that the connector is part of the motherboard, which is the main element of the computer.Therefore, doing such repairs is very difficult and quite dangerous. However, in such cases, the only saving grace is the fact that there are several such USB inputs on the motherboard, so work can be safely continued if they are not occupied by other devices.
6. Mechanical damage – a broken wire, malfunction of the sensor, breakdown of individual parts of the product. Most often, in such cases it will be more rational to simply replace the mouse.

What to do if the mouse moves poorly

Initially, it is worth checking the general condition of the mouse, inspecting it for damage and defects. If visually everything is fine with her, you need to perform several steps:

1. Test its operation on a different surface, try replacing the rug.
2. Clean the surface of the mat, and also check the mouse sensor for possible debris, carefully get rid of it.
3. View information about installed drivers and update them if necessary.
4. Try connecting the mouse to a different USB connector.
5. Use the standard diagnostic system installed in the operating system. It is located in the “Control Panel” section, in the “Problem Diagnosis” tab.
6. Scan your computer with an antivirus program for viruses.

Few people know, but harmful viruses also negatively affect the performance of the mouse. Therefore, in case of problems with control devices, additional scanning with an antivirus program will be a necessary and useful solution.