What can be made from a computer mouse

Nowadays, even from a computer mouse you can make original things. Many fans of fakes have long figured out how to use a non-working mouse.

Should you throw away your old computer mouse?

Sometimes a computer mouse becomes unusable, sometimes you have to replace an outdated model with a more modern one because of convenience. Often in this case, the appearance and contents remain in good condition. If you don’t want to throw away your old computer parts, you can give them a new life by using them to create interesting things.

What can be made from a computer mouse: ideas

External and internal parts from the old device will be useful for creating the following original things.

Robot

An unnecessary ball mouse will become a light-sensitive robot. To do this, the parts are disassembled, and the switches and infrared emitter are left for operation. The body must be freed from unnecessary parts and protrusions, and wheels must be attached, wrapped in three layers of rubber tape. Next, you will need a relay, which must be installed inside the case, connect the necessary contacts and solder the wiring. To operate, the robot will also need a small microcircuit; it must be placed inside the case.It remains to make two holes for the eyes and one for the LED lamp in the front and one hole for the toggle switch in the back. Contacts are attached to the right and left motors, eyes and battery are connected. The robot is turned on using a toggle switch.

Flashlight

By inserting an LED inside the housing, you can get a small flashlight. Using the same method, you can make a small table stand or lamp. A stand is attached to the place where the wire is connected, and a lighting lamp can be installed in the place of the ball.

Important! Do not use incandescent lamps as lighting. When they heat up, they can damage the plastic from which the mouse body is made.

Tachometer

Using a board from an old mouse, you can create a tachometer. Transistors and an LED board element will come in handy. A resistor is soldered into the free hole of the controller, and a contact from the phototransistor is connected to the board connector. All that remains is to connect the tachometer through the connector to the computer. The resulting device counts rotation pulses per second and displays the data on the monitor.

Winder

A hole is drilled in the upper part of the body into which an adapter with a convenient attachment is placed. Such a winder will be mechanical and will rotate due to the movement of the adapter.

What can be made from many computer mice

If you have a lot of computer mice, you can use them by making:

Columns

By disassembling the plastic case and placing a small speaker there, you can get audio speakers. To do this, you need to unscrew the screw with a screwdriver and divide the device into two parts. Place a custom-sized speaker inside. The wiring must be cleaned, the contacts and their compatibility with the color of the wire must be checked with a tester.Then use hot glue to firmly secure the speaker disk inside and connect both parts of the housing. This portable speaker is suitable for a phone, tablet, player and even a computer.

Advice! If you make a hole in the front of the mouse body, the sound will be more powerful.

Robot RoboCop

This idea will work if you have a lot of broken computer mice at home. From them you can assemble the body and limbs of a complex robot. The role of such a craft can only be decorative, but if you equip the robot with an electrical mechanism, you can get an interesting toy that can move and emit light.

Cars for games

Using multiple devices, you can create a collection of toy cars. To do this you will need wheels from old children's cars. You will need a drilled through hole in the side of the case into which you need to insert a pin with wheels.

Toy plane

You can make a plane out of three mice. One of them will serve as a body, and the other two need to be disassembled and the wings of the aircraft will be designed from two parts of the body.

You can make truly original fakes out of a computer mouse. And if you show a little imagination and knowledge, you can make a radio-controlled car or airplane.