How to set up a JBL speaker

The JBL wireless speaker has been gaining real popularity lately. Users, especially school-age ones, can be found with a gadget in their hands almost everywhere. After all, the device is not very expensive, and when else will there be a chance to please others with your favorite audio compositions. Well, it will be useful for others too. Listening to music in a close circle, up to and including a forest clearing, on the beach, on a hike, on a city street, is an advantage. Having only a smartphone or tablet, you can organize yourself a real disco away from concert halls and disco clubs.

Features of connecting a JBL speaker

The JBL speaker has been purchased, all that remains is to connect it and actively use it for its intended purpose. It should be noted that this is a completely simple process for both mobile devices running the Android operating system and the iOS operating system. But in order to use the device, a number of certain actions must be performed, and you must clearly know how this is done. So that you don’t have to look for information in a hurry later.

It should be remembered that you can connect speakers using Bluetooth wireless technology, but not only with it.

The first step is to press the power button on the column. It must be held pressed until a specific signal sounds, indicating that the device is turned on.

Instructions for connecting a JBL speaker via Bluetooth

How to connect JBL external speakers via Bluetooth in practice? By the way, it should be noted that this is a very good connection method; its implementation does not require any cables, connectors, plugs or other interface elements.

To some extent, the signal may be worse than with a wired connection, but not so much as to sacrifice such a convenient connection method. And just a smartphone, hung with various devices, is simply inconvenient to use.

So, in order to still be able to enjoy audio compositions with only a smartphone, you should find a table not far from power outlets. Place mobile devices next to each other. The Bluetooth adapter should be running on both gadgets. To carry out this process without problems on the speaker, you need to press the corresponding button and hold it again until a characteristic signal is heard, as when turning on the speaker itself. When red and blue flashes around the button, that’s it, it’s ready to use.

How to set up a JBL Charge 3 speaker

Now it's time to set up your smartphone (tablet, other device).

1. In Android gadgets, you need to go to the settings page. Usually the tab with Bluetooth connection and settings is at the top of the page.
2. Next, you should use “Search for devices”, select a column and confirm the connection.
3. That's it, the settings are over, the connection is ready for use.
4. If it turns off unexpectedly, you just need to repeat all the settings discussed above.

Connection via AUX. To implement this, you need a 3.5 mm cable, usually used on smartphones and tablets to connect headphones.

1. In this case, virtually no settings are needed.
2. Connect, adjust the volume and listen to music.
3. But again, the device will be covered in wires.

In addition to the 3.5 mm jack, there are other, newer ones. For example, on devices with the latest versions of iOS.

The latter are still much less common than Android devices, since they are installed almost exclusively on mobile devices of the American company Apple.

Be sure to pay attention to several important points. If you cannot connect and configure external speakers, the problem may be a failure of the operating system. If you do not have the relevant experience, it is better to entrust flashing to specialists from service centers.

If you try to flash the firmware yourself, you can damage the system, and then getting it back into working order will take much longer than originally planned. Specialists, especially certified ones, have much more opportunities to fix the gadget, since they have special knowledge and work on specialized equipment.