How to turn on the backlight on your keyboard

The backlight makes it easier to work with the device at night or in low light during the day. It is especially necessary for those who have not yet learned touch typing.

You can find out whether your device has this function by looking at a book with user instructions, or by searching the Internet for information about the model of your computer or laptop.

Advice! If the markings on the buttons are translucent in color, it is most likely backlit.

Rules for turning on the backlight on the keyboard

Basically, in laptops, the Fn button and + one of the function keys F1-F12 are responsible for this function, depending on the manufacturer and model of the device. To understand which one it is, you can take a closer look at the drawings on the keys. However, remember that each key combination is responsible for a specific function (sleep mode, mute, etc.). To cancel completed actions, click this button combination again.

Let's look at methods for turning on the backlight on laptops from some manufacturers.

1. Lenovo (Z500p): Fn + "space".
2. MSI (GE60, MSI GE70). A separate key located above the keyboard.
3. Asus: Fn + F3.
4. HP: Fn + F5 or F12.
5. MacBook and Microsoft. The default is “automatic”. To configure, use Boot Camp Control Panel.
6. Apple. System Preferences > Keyboard.

Advice! A method for users who do not have backlighting. Buy a mini USB device. Or you can make it yourself using lamps, USB cables and additional strengthening agents.

Attention! If you find that the laptop has a button with the corresponding pattern, but the backlight does not turn on, then the following problems are possible:

1. Lack of driver. This problem may occur when reinstalling the operating system. To do this, go to the laptop manufacturer's website and download the appropriate driver.
2. Shutdown in BIOS:

• Go to the device BIOS. Before turning on the laptop, press Fn + (F2 – F12, depending on model).
• In the configuration, select “System Configuration”.
• Open the Action Keys Mode option.
• A special window will open. If the value “Enable” is there, then everything is fine, otherwise change it to this expression.
• Save the BIOS settings either with F10 or using “Save Changes & Exit”.

How to change the backlight color on the keyboard

Most laptops have single-color LEDs. In this case, you will not be able to switch the shade. Their spectrum is formed on the basis of RGB (red, green and blue) lamps.

However, if you are the owner of a model that has a shade control function, then we will consider options on how to do this.

1 option (for multi-color). As you already understand, color is based on RGB lamps. To switch to the desired color, for example, in Asus, the Asus Aura program is built-in. In addition, it allows you to change the saturation and brightness of the lamps.

Steel Series Engine program - suitable for all modern laptops. The main part of the program settings is intended for gaming mice (to increase acceleration and sensitivity).For keyboards, it is limited to a panel for adjusting color and brightness.

Option 2 (for single-color). If single-color lighting does not bring benefits, then you can change LED lamps. To do this, you need to disassemble the keyboard. Next, replace the single-color lamps on the board with LEDs of the required color. Please note that the dimensions of the lamps must match.

Option 3 (for single-color). For this method you do not need to buy colored LEDs. Disassemble the keyboard. Glue translucent paper of the desired colors onto the board. If you wish, you can make it a single color, for example, blue, or depending on the groups of buttons. As a result, the light will pass through the stickers and glow with its color, creating a muted, rich backlight.

How to switch the keyboard backlight

If you think that the backlight has a bad effect on the battery charge, then you can safely turn it off. There are several ways to do this:

1. Use the hot buttons you used to turn it on.
2. In the settings of the program that was used to change the color (the reviewed program).
3. Press the special button to turn it off (available in some models).

Advice! You can set it to turn on and off automatically.

The main advantages of this option:

• The brightness changes depending on the ambient light, which is controlled by a special sensor. When it is shaded, the function is automatically turned on.
• Set the time interval. After the last key press after a specified interval, the lights turn off automatically. Allows you to save laptop power, for example, when reading or watching videos.

Is there a difference between turning on the backlight on a laptop and a computer keyboard?

The structure of a laptop keyboard is slightly different from a computer keyboard in the layout of the buttons and the absence of an additional panel.

But when turning on the color of the buttons there is no significant difference. As with laptops, the same situation is observed with laptop models and manufacturers.

Since the keyboard is connected to the PC, changing it with a backlight will not be difficult, unlike a laptop. You can also select components from different manufacturers for your PC, depending on the power and price category or for what purpose you are purchasing the computer. Manufacturers also offer modern touch panels with a wide range of options for customization.

Backlighting is a very necessary feature for those who like to work at night. You can diversify the same type of lighting with different colors at your discretion.

The backlight consumes energy, thereby reducing the battery charge much faster. However, the advantages of the function are much greater. In addition, lamps save energy. Therefore, you can enjoy comfort. Make the most of your device.