Joystick does not connect to PS4

Thanks to the development of technology, the problem of tangled wires on game consoles has been solved. Now, all modern consoles are equipped with a wireless joystick connection system. Gaming on PS4 relies on consistent, high-quality joystick response, but even the latest technology suffers from glitches and many gamers are faced with missing or delayed signals.

Why the gamepad does not connect to PS4

It is very easy to understand that there is a malfunction in the functioning of the joystick - at its end there is a light indicator, the color of which changes depending on the activity of the game mode. If the light signal is stable, the devices are connected and ready for use. However, it often happens that the indicator light is on or flashing white. This means that there are problems with synchronization. After one or more unsuccessful pairing attempts, the indicator color changes to yellow. This means the joystick is not working.

There are several reasons that prevent the gamepad and console from synchronizing:

1. There is an error in the synchronization process itself.
2. Signal blocking.
3. Error or glitch in the software.
4. A technical error.

Based on the complexity of the problem, you can fix it yourself or contact a service center. The last method will be relevant only if none of the listed methods led to a solution to the problem.

ATTENTION! If the problem is related to the “brain” of the console, you should not try to solve it yourself or turn to “traditional craftsmen”. Technical work of this level must be carried out by qualified specialists at a service center.

How to solve the problem if the joystick does not connect to the console

Depending on the cause of the malfunction, there are several ways to eliminate it.

If the signal is blocked, first of all, you need to check whether there are any obstacles to its passage between the gamepad and the console. The cause of the failure may also be the large distance between the console and the joystick. For diagnostics and synchronization, you can connect them using a USB cable. If an error or failure occurs in the program, you must reset the settings by pressing the Reset button, and then begin the synchronization process.

IMPORTANT! If the light indicator on the gamepad continues to blink white or yellow, it means that the cause of the breakdown is a technical malfunction. In this case, you must take the joystick to a certified service center.

It happens that only safe mode is activated. As a rule, such a malfunction occurs if the controller was connected to a PC. In this case, the gamepad may not sync with the console or may only work in safe mode. There are several ways to troubleshoot this problem:

• Press and hold the Hard reset button for 20 seconds;
• perform a complete reset;
• replace the microcircuit that is responsible for pairing the console and joystick.

ATTENTION! The board replacement procedure should be carried out exclusively by qualified technicians at a service center.

It happens that the indicator light on the gamepad blinks, but the console does not function.To resolve this problem, you can perform a full reset and download new software.

It happens that the device does not charge. If the battery charge is low, interruptions in synchronization may occur. In this case, it is necessary to replace the power supply battery in the joystick. If replacement does not solve the problem, you can try changing the charger cord or its connector.

Listed above are the most common reasons why the gamepad does not connect to the PS4 console, as well as ways to troubleshoot the problem. If you were unable to get rid of the problem on your own, you need to contact a service center to diagnose and repair the console.