How to charge an xbox 360 joystick

Any equipment powered by electricity discharges from time to time. The Xbox 360 joystick also requires charging. To do this, you can use 2 methods.

We charge the xbox 360 joystick using a special wire and xbox

To carry out the procedure, you must have a cable. You need to take the battery pack and do the following:

1. Find the petal at the top of the AA battery pack.
2. Lightly press the design.
3. Open the gamepad.
4. Insert battery.
5. Snap the fastener into place.
6. Connect the cable to the charging port.
7. Connect the charging cable to the gamepad port.
8. Activate your xbox 360 console.
9. Look at the color indicator (if the red light is on, it means the device is being powered. Green indicates that the battery is ready for use).

While the process is happening, you can play. Signals are transmitted unhindered. But if you disconnect the cable, the device will stop powering and it will discharge after a while.

To avoid problems, from time to time the Xbox joystick should be wiped from dust with a soft flannel cloth or sponge. Chemicals must not be used. Also no water needed.

How to charge a joystick from the network

It must be taken into account that the output voltage of the joystick should be no more than 3 Volts. To do this, you will have to purchase a resistor or a special DC-DC step-down converter. Then the input can be any voltage, usually 5 Volts, and the output will always be 3.

Typical parameters: 5V,450mA. You should purchase a 3 Volt power supply. The device must have a battery, otherwise it will not be powered.

You can use usb inputs on a computer if you have Windows Microsoft software, Windows 10. Some use recharging from a mobile phone, smartphone or iPhone. This is where power converters come into play. You can also power the joystick from the TV. To carry out the procedure, a special cord, wire, cable, or extension cord is purchased. The devices are searched for the presence of appropriate inputs.