How to output sound to a ps4 joystick

In order to really enjoy spending time before playing, you should take care of the quality settings of some parameters, for example, how to output sound to the gamepad. Thus, in this article we will consider methods not only for outputting sound to ps4, but also for setting it up directly.

How to turn on sound on ps4 joystick

So, to ensure a full gaming experience, it is recommended that you start by connecting your headphones to your hardware. First, let's look at the option that uses a wired accessory. Therefore, it makes sense to follow the sequence of actions below:

• The first step is to arm yourself with a joystick and conduct a thorough inspection of the structure. You should find a special jack on the case (3.5 mm jack) intended for audio.

REFERENCE! The named connector is a combined one, which means that you can connect a headset, and it will also be operational.

• Thus, the end of the headphone wire must be fixed directly to the main system - ps4.

ATTENTION! If you are the owner of a wireless model, then a slightly different procedure will apply. In this case, you must first purchase a Bluetooth receiver. The main advantage is the ability to use even the modern version of bluetooth, which means you can get the highest quality sound.Accordingly, to achieve the result, the following manipulations are indicated below:

• First, it is important to connect the receiver directly to the audio output of the TV.
• Now you can begin the main process - pairing. To do this, you should hold down the power button on both devices for quite a long time (an acceptable period of 6 to 10 seconds).

IMPORTANT! First make sure the equipment is turned off.

• After this, you can activate existing inventions.
• If the fraud is carried out reliably, pairing will automatically begin in a few seconds.
• Finally, it is important to enable the appropriate output on the TV itself.

How to adjust speaker settings

After the connection described above, all that remains is to achieve the best parameters. To do this, the algorithm of actions is presented below:

1. As is already clear, you will need to consult the menu. That is, first you should click on the “settings” section.
2. There you will also have access to a list in which it is important to directly mark “device”.
3. Next, you should click once on “audio devices”, and then click on the line called “headphone output”.
4. The last manipulation is the “all sound” mark.

Thus, you have the opportunity not only to distinguish between the sounds being reproduced, but also to speak if the equipment is equipped with a headset. For further configuration, you can use the following method:

• It is advisable to first make sure that you are logged in through your own account.
• Now you need to hold the PS button until a menu appears in front of you.
• Next, you need to check “adjusting sound and devices.” This is done using the "X" button.
• When the window opens, select "volume control."
• From now on, you can adjust the indicator as desired.