How to connect a second joystick to Xbox One

Two joysticks.Each Xbox One comes with one controller. If you like to play with friends, then you need to purchase additional joysticks for your console. The set-top box supports simultaneous connection of up to eight wireless controllers.

In this article we will tell you how you can connect (synchronize) a new controller with your Xbox One.

How to connect a second controller to Xbox One using a button on the console

Most gamers claim that they can get maximum pleasure from the game only by connecting a gamepad wirelessly.

To use the new joystick wirelessly you must:

  1. Install two batteries or an AA size battery into the gamepad.
  2. Connect the set-top box to the power supply and turn it on.
  3. Turn on the gamepad by pressing and holding the Home button (the large key at the top in the central part). If the “Home” button backlight glows evenly, it means synchronization with this gamepad was carried out earlier and there is no need to repeat the process. If this gamepad has not previously been synchronized with your console, you will see the backlight of this button blinking.
  4. Press the button on the left of the console once, which is responsible for synchronizing wireless devices.

Synchronization button on the gamepad.

You now have 20 seconds to press the sync button on your joystick. It is located on the top end, in close proximity to the micro-USB connector.

ATTENTION! The controller's Home button will flash quickly to indicate that it is searching for devices to sync. If synchronization is successful, the blinking will be replaced by a uniform glow of the “Home” button of the gamepad.

The process is over. The new gamepad is connected and synchronized with your console, you can enjoy the game in the company of friends.

There is another way to wirelessly synchronize, using the Kinect set-top box.

The procedure is similar to the previous method, the only difference is that you do not press the sync button on the console, but simply turn on all components, point the joystick towards the Kinect camera and press the sync button. The Kinect camera will catch the infrared signal from the controller and synchronization will occur automatically.

Xbox-One-Kinect-Sensor.

How to connect a joystick to Xbox One using a cable

Another way to connect the controller to the set-top box is to connect using a micro-USB cable. You can use this method if you are not embarrassed by the prospect of playing with a connected cable.

To implement this method, simply plug one end of the cable into the micro-USB connector on the top of the joystick and the other into the jack on the console. That’s it, no additional actions need to be taken, you can start playing.

Joystick with cable.

Some people find the cable inconvenient, but it's the only way to play if you don't have the necessary batteries to use the joystick wirelessly.

These are the basic methods for connecting a new controller to your Xbox One console. We hope that our advice will be useful to you and you will easily cope with the task.

Comments and feedback:

Washing machines

Vacuum cleaners

Coffee makers