Joystick dandy usb

Despite the fact that in modern times there is enough technology that has eclipsed previous models, playing dandy is a piece of going back to the past. However, it is necessary to understand the principle of connecting equipment directly to the main structure. In this article we will analyze the most common connection options.

How to connect a set-top box via USB

So, to achieve the desired result, it is recommended to adhere to the following sequence of actions:

• As is already clear, you must first purchase suitable equipment. The joystick itself may not be similar in appearance to other representatives. Therefore, a situation in which the product was taken from another console is acceptable.
• Now that all the units are assembled, you can begin installing special software. Accordingly, you will need an application called an emulator. The download process will not take much time. You just need to find the abbreviation “NES” in a search engine.
• Next will be directly connecting and setting up the file. First of all, it is important to insert the device into the USB port. Then, in the menu of the pre-downloaded emulator, it is important to select the item labeled “Config”.
• Then you need to check “Input”. In the window that opens after the above-described manipulations, you can click on “Input”, thereby the system will independently remember the location of all the keys on the joystick.

ATTENTION! As a result, you must save all the parameters you have made and exit the program menu.

• Now it makes sense to turn to the game itself. To do this, you also need to download it on the Internet, where all possible options are presented.
• To open it, you must first click on Open ROM through the main menu of the emulator. Thus, while reproducing the process, all completed levels and the state of the game will be saved in the program.

How else can you connect the set-top box?

Of course, in addition to the option of connecting via USB to a computer, there are other methods. The most commonly used method is the following:

• Since so many varieties of dandy are produced, all connectors are also different from each other. Therefore, port-LPT is worth exploring. Thus, two connectors are useful: LPT and COM. But they will have to be first disassembled and re-soldered according to a certain scheme, which can easily be found on the Internet.
• Accordingly, having soldered the necessary connections, you can begin to check the serviceability of the structure.
• If the indicator is satisfactory, you should start installing drivers. It is advisable to pay attention to the PPJoy program.
• After installation, a characteristic icon will automatically appear, which you will need to click on. In the proposed window, it is important to mark the Add button.
• Next, you will have to configure the appropriate parameters and also click on “Add”. After this, a section will appear where you need to click on “done”.

In the future, we will have to check the performance of the game and, if possible, calibrate it. If problems are detected, the structure will have to be re-soldered.