No steam coming out of the humidifier? What should you do?

A humidifier is necessary to increase the humidity in the room. The climatic device allows you to avoid dry skin and dehydration. It also supports immunity, helps relieve fatigue, and increases concentration. The humidifier has a positive effect on the condition of humans and indoor plants. Its work is based on the release of steam. This allows you to increase the level of humidity, thanks to which the climatic conditions of the room return to normal.

Equipment may break down. If steam stops coming out of the equipment, then something is wrong with the unit. Therefore, the device should be diagnosed to identify the cause of the breakdown and eliminate it.

Reference! Some breakdowns can be repaired yourself. But if the reason is serious, it is recommended to contact specialists so as not to completely damage the equipment.

Possible causes of a malfunction due to which no steam comes out of the humidifier

There are several reasons why steam may stop coming out of your humidifier. Among them:

Generator damage. To determine the quality of its operation, remove the cover from the bottom of the device.Carefully plug it in for a few minutes.

Attention! You should proceed with extreme caution. Do not touch the internal parts of the equipment while performing the above action.

Afterwards, you need to turn off the device, be sure to unplug the plug from the socket and touch the transistor heat sink located on the electronic circuit. If it is cold, then the generator is not working.

• Oxidation of contacts. This situation can be caused by liquid getting inside.
• Fan failure. To check operation, you should use a multimeter. It is used to measure the voltage on the turbine windings. If it is present, but the fan does not function, then this is the problem. A part needs to be replaced. It is important to choose a fan that is suitable in size.
• Membrane damage. The presence of a characteristic gurgling sound without steam escaping indicates problems with the fan. Otherwise, the absence of such sounds means that there is a problem with the membrane.
• Problems with the air intake filter. The presence of a characteristic gurgling sound and the operation of the fan means that it is worth checking the filter. Sometimes steam problems occur because this part is clogged. The air intake filter needs to be replaced.
• The power board is faulty. If, when measuring the voltage of the turbine windings, it is discovered that it is missing, then the problems are related to the power board.

Debugg

Once the cause is identified, it is important to correct it. Some parts can be replaced yourself. But in most cases, you have to contact a professional service center to eliminate the defects that have arisen.

Faulty parts that require replacement by a professional appliance repair specialist

If the problem is in the fan, generator or power board, then you should call a specialist. In the first case, a complete replacement of the part will be required. It is important that the fan is the right size. Correcting problems with the board or generator will not cause large financial costs. But it’s better not to try to fix the situation on your own. You can damage the equipment even more, which will lead to the need to purchase a new humidifier.

Faulty parts that you can replace yourself

Parts such as a membrane or filter can be easily replaced yourself. To eliminate such malfunctions you do not need to have special skills. If the air intake filter is clogged, you need to purchase a new one and replace it. If the membrane breaks, it also needs to be replaced. You can purchase this part at a radio store or service center.

A humidifier helps normalize indoor air humidity, which has a beneficial effect on human health and skin. When it stops producing steam, it means it needs repairs. After all, the main task of the device is to release steam, with the help of which the humidity level increases. After determining the causes of the failure using diagnostics, you should call a specialist or fix the problem yourself.