Reasons why the iron does not heat up and does not steam

Quite often there are situations when the iron stops functioning normally for no apparent reason.

There are several common faults that are quite easy to identify at home, before calling a technician.

Common iron breakdowns

Preliminary inspection of the iron significantly reduces the scope of troubleshooting. It is necessary to inspect the housing and make sure there are no cracks or defects.

The most common is the lack of contact in the power cord. This usually happens due to frequent kinks and poor quality materials used in production.

The next most common problem is a breakdown of the temperature controller. At the same time, the warning light lights up.

The overheating fuse is the next element in line in terms of failure frequency. It forcibly opens the electrical circuit. Its failure is quite easy to determine; when the iron reaches a certain maximum, it continues to heat up to the physical limit.

The heating element completes the list of breakdowns. If the iron is in working condition and all indicators are normal, then this is the reason.

Reasons why the iron does not heat up

The primary reason for the lack of heating is the breakdown of the special plate. The heating element may burn out or the connecting wire may simply come loose. Sometimes this happens after a fall, but due to the lack of visible damage, they do not pay attention in a timely manner.

The next reason for the lack of heating is a breakdown of the thermostat. Because, according to the diagram, the current must pass through several fuses before reaching the heating element, one of which is the regulator.

Most often, the regulator breaks due to improper operation or mechanical damage.

Due to frequent twisting of the wire, the contact wires break and cease to fully transmit electricity, this may be the reason for the lack of heating.

Reasons why the iron does not steam

The most common reason for lack of steam is improper operation. It is then that the iron begins to spray water instead of steam.

The second reason is valve malfunction, if the device is used correctly. If the warranty period has already passed, you need to contact a household appliance repair specialist.

Tips for using your iron to avoid breakdowns

Important! Carefully reading the instructions before starting operation will help you avoid common and common breakdowns.

It is necessary to carefully monitor the cord and do not twist it to avoid cracks and breaks in the conductive wires. Naturally, don’t drop the device; it won’t say thank you. Allow to cool slightly before putting it back to prevent condensation from accumulating and causing corrosion. Be sure to wipe the heating surface after cooling.Do not leave it turned on for a long time without use.

Tips for troubleshooting iron breakdowns

It is possible to fix simple breakdowns using improvised means. If the steamer is not functioning well, clean it with a 1:200 vinegar-water solution.

Of course, if a person does not understand technology, then it is advisable to call a specialist. Ask for the problem to be repaired.

Conclusion

Each breakdown requires a competent approach, since inattention or carelessness can lead, at best, to a short circuit.

Attention! DIY repairs without special skills are dangerous to your health.