How to iron paper

It has happened to many that a very important document has become wrinkled or wet. Sometimes you can make a photocopy, but there are cases where it will take a long time or the document cannot be copied (money, cases where originals are required). Don't despair if you've had this problem. There are ways to straighten paper at home. Let's consider the method of leveling using an iron.

Is it possible to iron paper with an iron?

In general, you can use an iron to restore wrinkled documents. The method of leveling with an iron is the most famous, and one of the riskiest. You can use it, but you need to do everything carefully, following the rules.

How it all happens

Ironing paperThe crumpled paper needs to be smoothed out as much as possible so as not to make new bends. Cover with a towel or cloth to protect it from extreme heat.

Set the iron to the lowest power setting, gradually increasing the temperature as you go.At high temperatures, the paper may turn yellow. After ironing one side, the sheet must be turned over and the procedure repeated.

Methods for ironing paper with an iron

There are two ways to iron paper: dry and wet. If, after dry leveling is completed, folds are still visible on the paper, you can use the second option.To do this, you need to moisten the paper product and also iron it.

Important! When processed wet, paints may lose brightness or even bleed.

When using this processing method, you need to be as careful as possible: slightly moisten the sheet, preferably use for a denser surface.

Pros and cons of ironing paper compared to other methods

The method using an iron should be used if the document needs to be straightened in the near future. If there is enough time, then it is better to choose a safer option.
Leveling under pressure. The sheet must be placed between two even and heavy objects. It is used when there is a lot of time: the option takes about two to four days. Second and last method - This is to take the paper to a specialist for alignment.

Important! If the document is valuable, it is better to try the ironing method on a small part of it, or entrust the matter to professionals.

Leveling with an iron does not require as much time as with a press, however, the method using a press is much less risky. And although the option in which you need to take the document to a professional is the safest, most likely it will be expensive.

Tips for ironing paper safely

Ironing paper with an iron is not an easy task. To avoid causing any damage, you need to follow certain rules.

Ironing paperThere is no need to iron immediately at high temperature. The inks may melt and the sheet may deteriorate. The temperature must be increased gradually. It is better to moisten the sheet using a spray bottle, in this case there is less chance that the paint will flow.

Do not push the degree mark on the iron to the maximum setting. You need to iron at a mark slightly above average.If you don’t have time to wait for the paper to dry, you can iron it without getting it wet. However, fold marks may remain visible. To avoid similar cases, it is better to buy a document folder.

The paper should be handled carefully. After all, with such treatment you can avoid troubles. But if they have already happened, the iron will help correct the situation. When using this method, you must be careful. If you do not calculate the temperature, or make a mistake in something, you can completely ruin the document.

Comments and feedback:

Washing machines

Vacuum cleaners

Coffee makers