How to clean an iron with citric acid? Learn how to clean appliances using folk remedies

The instructions on how to clean an iron with citric acid are quite simple. To do this, you need to get a moderately concentrated solution and pour it into the tank. After this, the container is thoroughly washed so that no impurities remain. Cleaning methods and preventative measures are described in more detail below.

Internal cleaning

First of all, the inside of the iron is cleaned with citric acid. To do this, proceed as follows:

1. Measure out 20 g of the product (you can weigh it on a scale or take 3 level teaspoons).
2. Dilute in a glass of hot water.
3. Stir thoroughly until the liquid becomes completely transparent.
4. Then pour this solution into a container and turn on the iron to maximum.
5. When it heats up to the limit, the automatic shutdown system will work.
6. Immediately after this, press the steam boost button.
7. This is done several times until all the liquid is completely consumed.

This is one of the effective methods, since you can clean the iron with citric acid even from old scale. The principle of operation is quite simple. Particles penetrate into all layers of contamination and tear them off the surface. Then all that remains is to rinse the tank with warm, clean water. If the blockage is severe, repeat cleaning again.

Cleaning the base

There is also a way to clean the iron from scale with citric acid from the outside, i.e. directly to the sole. In this case, the instructions are as follows:

1. First, 600 ml of water is heated, i.e. approximately 3 cups.
2. 60 g of powder is dissolved in hot liquid.
3. Mix thoroughly to dissolve well.
4. Place the iron with the sole down in a pan or other container (preferably aluminum).
5. Then gradually pour the solution so that the water does not touch the electrical parts.
6. Leave to stand for 15 minutes.
7. Then wipe with a napkin or cotton pad.
8. The channels where steam flows are treated with cotton swabs.

It is important to understand how to clean an iron with citric acid. You can use any means, but not abrasive ones, i.e. powdery. The treatment is carried out with a solution or gel, and then wiped with a soft cloth.

Basic preventive measures

It’s clear how to clean an iron using citric acid. This is quite simple to do, but in order to preserve the device, it is recommended to follow preventive measures:

1. Only boiled water should be poured into the tank; it is better not to use tap water.
2. Cleaning is carried out periodically. If the iron is used frequently, this should be done every 6 months, i.e. 2 times per year.
3. If the water is hard, it is better to filter it.

Professional products are also used for cleaning, but citric acid helps to deal with scale well. If such procedures are carried out periodically, there will be no deposits, and the instrument will work for a long time.