Why is a fuse needed on an Indesit washing machine and where is it located?

The fuse on the Indesit washing machine and other devices is usually located in the power cord or on the electronic board. This is a small but important element that protects electronics and other parts of the device from power surges. This article describes how to find it yourself and determine the malfunction.

Where might the fuse be located?

This part is located in different places - it all depends on the manufacturer, as well as on the specific model. It is best to find an electrical diagram in the instructions (description of the device) or in other open sources. It looks like a crossed out rectangle, as shown in the figure (can be positioned either horizontally or vertically).

You can also determine where the fuse is in an LG washing machine or other models yourself. There may be several options, the most common are:

1. Inside a plug that connects to an outlet.
2. From the other end of the power cord (inside the case).
3. Near or directly on the electronic board.

To understand and find the fuse in the LG washing machine or other models, you can open the cover on top. To do this, unscrew 2 screws and push the panel in the opposite direction.Then they remove it and find the fuse, which may look like the one shown in the photo.

Purpose and principle of operation of the element

The washing machine needs additional security in case of power surges or insufficient voltage supply. This is a rather complex unit, equipped not only with mechanical parts, but also with electronics (board with processor). It is this element that most often suffers in the event of a short circuit or sudden change in the wiring, just like a computer, as well as other modern devices.

The fuse, as the name suggests, protects against these phenomena. Thanks to this, the board remains intact. Regardless of where the fuse is located on an LG washing machine or other models, it performs its function well. This allows you to insure yourself in case of breakdowns and save on repairs.

The principle of operation of the element is quite simple; it is common to all electrical appliances. If the current in the wiring increases, one of the conductive wires of the device melts, due to which the circuit immediately opens, i.e. the current stops flowing. The molten material looks like a tube with a small glass tube. He minimizes changes and takes the possible blow on himself.

Causes and signs of a blown fuse

The fuse in the Bosch and other brands of washing machines blows for the same reasons. Moreover, the main one is a sharp surge in voltage in the wiring, which is often observed during an accident or thunderstorm. But there may be other factors:

• failures in the electronics specified in the program;
• excessive loads;
• failure of a certain part of the device;
• wear and tear due to long service life.

If a fuse has blown in a Bosch or other brands of washing machine, the malfunction can be determined by a number of signs:

• the device stops working;
• suddenly turns off;
• Doesn't start even after plugging in.

Diagnosis at home

To make sure that this element is faulty, you need to check it with a multimeter. The instructions are quite simple:

1. Switch the device to the mode for determining the resistance indicator.
2. Remove the fuse and place it on the table.
3. Press the multimeter probes onto the contacts.
4. Record the reading on the display to understand whether the heating element fuse of the washing machine is working or not.

If the tool shows 0 Ohm, then the fuse is working, and the cause of the unit malfunction is somewhere else. If it does not show anything, the element is clearly broken and requires replacement.

The violation may be due to a short circuit, for example, from the heating element. Additionally, you can inspect it and, if necessary, replace it with a new one. It is important to understand that the fuse itself cannot be repaired either - the only option left is replacement. You can do it yourself. But if you don’t have the appropriate skills, it’s better to call a specialist.

Now it’s clear where the fuse is for the Bosch washing machine and other models. This is a small part that is often found in the plug itself or at the other end of the power cord. Since it protects electronics, it can also be located on the board.

It does not matter where the fuse for the Ariston washing machine or other devices is located. The most important thing is to correctly identify the fault and, if necessary, replace the element.