We are learning how to disassemble an Ariston washing machine. Top Tips for Repairing Hotpoint Washing Machines

To repair the washing machine, replace spare parts and carefully inspect it, it is necessary to disassemble the unit. For this, a standard set of screwdrivers and a diagram of the device itself are sufficient. But it’s worth considering that each model range has its own characteristics, for example, non-standard mounting of counterweights or a non-separable tank that needs to be broken to remove the drum. Instructions on how to disassemble an Ariston washing machine, a step-by-step description of the process with photos are presented in this material.

Required Tools

Before you understand how to disassemble the Ariston Hotpoint washing machine, you should prepare the basic tools:

• a set of screwdrivers (phillips and flat);
• a set of keys;
• Open-end wrenches (8 and 10) will be needed separately;
• bit;
• hammer;
• pliers;
• hacksaw for metal;
• wire cutters;
• flashlight.

Preparatory stage

Disassembling the Ariston washing machine begins with de-energizing it and disconnecting it from the network. Then proceed like this:

1. Be sure to close the cold pipe tap that supplies water.
2. Move the unit away from the wall and furniture so that it can be conveniently approached from any side.
3. Remove the nut securing the inlet hose.It must be removed because the back panel is also removed during disassembly.
4. Also, disassembling the Hotpoint Ariston washing machine requires preliminary dismantling of the drain filter. It is located below, right behind the hatch. Therefore, the hatch must be opened by removing the latches. Place a low container and unscrew the filter.
5. If necessary, clean it of foreign deposits and rinse under running water.

Removing the Cover and Front Panels

Now begins the main stage of the instructions on how to remove the top cover of the Ariston washing machine. You need to start removing the cover and front panels. The sequence of actions is as follows:

1. To remove the top cover, take a screwdriver or hexagon and unscrew the bolts.
2. Then it is gently pushed in the opposite direction from the person, lifted slightly up and removed. As a result, something like this will appear.
3. Pull out the tray - to do this, press the latch in the center (it is usually blue) and carefully pull the part towards you, while simultaneously shaking it left and right.
4. Next you need to understand how to disassemble the Hotpoint Ariston washing machine to remove the front top panel. Find the screws behind the tray (behind the part).
5. Press out the plastic latches using a flathead screwdriver. It's a good idea to take a photo of the wires at this point so they can be easily put back together.
6. Disconnect the contacts and remove the panel. Some models have a special hook for hanging them. In this case, the method of disassembling the Hotpoint Ariston washing machine is simplified.
7. If you need to remove the tank, move on to the cuff - you will need to remove the clamp from it by prying it off with a screwdriver. It is convenient to tuck the cuff inside the tank.

Removing parts at the rear

The next stage of the instructions on how to disassemble an Ariston washing machine involves dismantling the parts that are located at the back.

The sequence of actions is as follows:

1. They visually find the motor - it goes right under the tank.
2. Disconnect all wires that come to it.
3. Unscrew the bolts securing the engine (usually there are 4 of them).
4. Gently rock the engine back and forth and pull it up.

When wondering how to disassemble a Hotpoint Ariston washing machine, you need to understand how to remove the heating element. To do this, dismantle the wires and terminals that lead to it, take out the heating element and, if necessary, clean it. If necessary, it is removed from the socket, but then during assembly it is necessary to install a new sealing rubber band.

The following instructions on how to disassemble the Hotpoint Ariston describe the procedure for removing the drain pump. The unit must first be placed on the left (if you look at the door, as usual), since otherwise you cannot reach it. The algorithm is like this:

1. Remove the screws that secure the bottom cover (some models do not have it, then skip this step).
2. To disassemble the Ariston washing machine with your own hands, you need to unscrew the screws securing the filter to the front.
3. Then, when the fastening is loosened, the filter is gently pushed and it falls into the hand along with the pump.
4. Next, take pliers and unbend the clamp that secures the drain pipe (it needs to be separated from the pump).
5. Unscrew all the bolts that connect the pump to the filter.

Removing parts at the top

At the last stage, the instructions on how to disassemble the drum of the Ariston washing machine and other elements proceed as follows:

1. Unclench the connector of each wire that leads to the temperature sensor and filter.
2. The pressure hose must also be removed from the sensor.
3. To remove each part, simply unscrew the screws. This is a fairly simple step - no more difficult than the method of removing the lid of an Ariston washing machine.
4. The sensor hose should also be disconnected from the tank, because it can be damaged during operation. Since it is attached with plastic clips, they can be easily cut using wire cutters.

How to remove counterweights

We can say that the above describes the last steps that complete the disassembly of the Hotpoint Ariston washing machine. But it is also worth describing the instructions for removing counterweights. For many devices, they are fixed with simple fasteners, the dismantling of which is intuitive.

But in the case of Ariston, the situation becomes more complicated, since the manufacturer uses a special type of fastening. To remove them, a special key is used, which must be purchased in advance.

After removing each counterweight, the racks can also be removed. Here the work will be easier, because they are fixed with plastic rods. To dismantle, press the latches and use pliers to pull the rod towards you.

How to remove the drum

After removing the counterweights and racks, all that remains is to figure out how to remove the drum of the Ariston washing machine. Now it is held in place only with the help of hanging hooks. To dismantle, the tank is lifted and mechanically removed from these hooks.

If you need to get the drum itself, you will have to cut the tank, because it cannot be disassembled (like many other devices). You need to do this:

1. Take a hacksaw and install the tank on its edge.
2. Saw along the perimeter and remove the top fragment.
3. Turn it over and hit it a little with a hammer so that the drum comes out.
4. If necessary, proceed to replacing the bearings.

Thus, disassembling an Ariston washing machine with your own hands is quite accessible even with simple tools. It requires not so much advanced skills as accuracy. In addition, models from this manufacturer have several assembly features that are best known in advance.