How and with what to lubricate a bearing in a washing machine

Washing machine - This is a complex device that requires maintenance. Special attention should be paid to the bearings, which are responsible for the quiet washing mode.

If a loud sound appears while the machine is running at high speeds, you should immediately check their condition. This will help avoid damage to the automatic machine.

Bearings in a washing machine

This part is the most important element, the performance of which is required for the proper functioning of the equipment. Let's look at the main aspects of the product:

Description

A bearing assembly is a link connecting the pulley and drum of the equipment. It is most often installed in a cross located in the tank. The assembly includes two types of bearings, which differ significantly in size, distributed as an internal part and an external one.

Manufacturers present two types of parts - metal and plastic. The first type is considered more resistant to wear.

Purpose

The part is installed on the drum shaft; when the equipment is operating, the bearings control the correct operation of the device. The rotation is smooth and without any beats or vibrations.

How to lubricate the bearing in a washing machine?

Timely care of the part will significantly extend the service life of the equipment. But the lubricant, in turn, must be selected carefully and in accordance with the requirements of household equipment.

There are a sufficient number of varieties of this composition on the modern market. The right choice will provide reliable protection of the part from wear, the main thing is to select the lubricant characteristics according to the requirements of the washing machine.

It must meet the following parameters:

• Availability of moisture resistance.

The oil seal is a sealing ring that is attached to the bearing itself, which rotates on the shaft. Thanks to this, water does not penetrate into the part. Therefore, the lubricant should not be washed away during operation of the mechanism.

• Heat resistance.

The water in the drum sometimes heats up to 90 degrees, which should be taken into account when purchasing a lubricant; it should not lose its characteristics when heated.

• Suitable.

An important aspect is compatibility with rubber; a poor-quality composition can ruin it - greatly soften it or, on the contrary, make it hard and unsuitable for use.

• Density.

The grease must remain on the bearing even when the drum is heavily loaded.

Important to remember! You cannot use the automotive version of the lubricant, as they are not intended for washing machines. Bearings quickly fail after using such a lubricant.

What happens if you don't lubricate bearings in washing machines?

Some people wonder whether it is necessary to lubricate this element? Preferably, experts say so.Bearings are responsible for the performance of the equipment; if noise and grinding noises appear in the product, it means that the drum is not working properly.

The bearings are responsible for the serviceability of this part; they ensure smooth rotation of the drum.

If a grinding noise appears, it means that it is not spinning smoothly, and therefore may soon become unusable. In addition, this may cause the operation of other parts that are part of the washing machine to malfunction. The result of this problem may be the final breakdown of the equipment, which will no longer be subject to restoration.

Why lubricate bearings in a washing machine?

Constant contact of the shaft with the inner surface of the bearings provokes wear of the part. Lubrication, in turn, makes this process less harmful to them, softening the touch and creating free sliding.

In the absence of a specialized composition that reduces friction, oil seals and bearings begin to dry out and crack over time. This leads to the need for repair work.

How to find a bearing in a washing machine?

To find this part you need to complete several steps:

• Disassembling the washing machine;

To do this, you need to remove the cover by unscrewing two bolts located on the rear panel. Then the tray for the washing powder is removed, then the upper instrument part is removed by unscrewing all the bolts on it. Next, the wires are disconnected.

Important! The process of disassembling the product must be photographed in detail so as not to confuse the assembly sequence later.

Removing the bottom strip is simple and quick using a flat-head screwdriver.

• Removing the hatch cuff;

This is the name of the rubber gasket, which is the connecting element between the drum and the hatch opening.

• Removing the front panel;

You can’t pull it too hard, as you can damage the integrity of the part.

• Removing and disassembling the tank.

This stage requires care and the right approach. It is imperative to photograph the process in great detail, since disassembling the tank is difficult.

Tips for using your washing machine

Proper use of household appliances is an important aspect in operation. To avoid sudden breakdowns, it is advisable to follow some recommendations:

• Do not load the body of the washing machine;
• There is no pressure on the loading hatch;
• It is not advisable to allow small children who actively use the software buttons unnecessarily to access the device;
• Pets must be kept at a direct distance from the device;
• Avoid transfusion;
• Use the device strictly according to the instructions;
• It is not advisable to change the program mode when water has already been collected in the machine;
• Do not rinse the drum with a stream of running water;
• To care for the product, use mild cleaning agents that do not scratch the surface.

Conclusion

Proper operation of the washing machine will prevent its sudden breakdown, and timely care of the product parts will help to significantly extend the service life of the equipment. The device must be used strictly for its intended purpose and according to the instructions from the manufacturer.