Malfunctions of the Indesit washing machine: do-it-yourself repair according to instructions with photos

It is quite possible to repair many faults of the Indesit washing machine with your own hands, without calling a specialist. For example, using ordinary screwdrivers you can inspect the heating element or clean the drain pump. At the same time, there are more serious problems that require inspection by a specialist. This material describes how to repair the unit yourself.

Breakage of heating element

One of the common malfunctions is the breakdown of the heating element. As a result, the water practically does not heat up, which can be felt by placing your hand on the glass of the door. Also, users sometimes note a burning smell, which indicates the final breakdown of the part and the need for its urgent replacement.

It is not difficult to carry out restoration work - in such a situation, it is possible to repair the Indesit washing machine yourself. But it is worth keeping in mind that the part is located under the cover at the back, so first the device must be disconnected and deployed. Then proceed like this:

1. Unscrew each bolt (6 in total) to remove the back panel.
2. Then the contacts of the heating element are found under the tank. It is to them that you need to attach the probes coming from the multimeter to check the voltage. Normally it should be from 25 to 35 ohms. Otherwise, there is a malfunction of the Indesit washing machine - the heating element needs to be replaced.
3. Next, it is recommended to take a photograph of the heating element with the wires, so as not to confuse the order of their connection later.
4. If the Indesit washing machine breaks down and the water does not heat up, you need to inspect the heating element. To do this, disconnect all wires with terminals.
5. After this, unscrew the central nut (1), but not completely. If the bolt does not fit into the hole, you need to take a small hammer and lightly tap it.
6. Loosening the heating element, pull it towards you. In this case, it is very convenient to use a regular screwdriver.
7. If the heating element does not work, you will need to repair the Indesit washing machine yourself. In this case, the old heating element is removed, a new one is inserted and then the wires are connected.
8. Next, secure the new part with a bolt, tighten the nut and put the back panel in place.
9. After the repair of the Indesit washing machine is completed, you need to check how it heats the water by touching the door with your palm.

Problems with drainage

Users sometimes encounter breakdowns of the Indesit washing machine and look for ways to fix them. Moreover, one of the most common problems is related to the drainage system. The most vulnerable element is the pump that pumps out waste water.

If you hear extraneous sounds during draining, the liquid drains too slowly or does not drain at all, the impeller is probably broken or the filter mesh or the hose itself is very clogged. These elements must be removed and cleaned by rinsing under running water, using detergents if necessary.

But if such measures do not help, you may need a more complex repair of malfunctions of the Indesit washing machine, involving inspection and replacement of the pump. The sequence of actions is as follows:

1. First, the car is de-energized, because if you simply press the shutdown button, it is dangerous to carry out repair work.
2. Next, remove the clothes from the drum and, if necessary, drain the water by placing a basin.
3. Find the mounting bolts on the front panel and unscrew them.
4. Find the pump under the drums and remove the volute, carefully unscrewing the bolts. At this stage, repairing the Indesit washing machine yourself must be done carefully, since the parts are quite fragile.
5. Remove the tube, wires and terminals. Moreover, before dismantling begins, they are photographed so that they can be assembled correctly later.
6. Install a new element and all other spare parts. Assembly is carried out in the opposite sequence
7. As you can see, in the described situation it is quite possible to repair Indesit washing machines yourself. It’s also easy to check the operation of the motor - after installation, plug the plug back into the socket and start the quick wash program. If the water drains normally, then the problem is solved.

Motor failure

If the motor breaks down, this is already a serious malfunction, the elimination of which is quite expensive. In such cases, it is first necessary to properly diagnose. Motor failure can be determined by the following signs:

• the drum does not rotate well (especially if a lot of clothes are loaded);
• a burning smell appears;
• the machine can give you an electric shock (this is unpleasant, but not dangerous);
• The housing heats up and may produce sparks.

Similar signs of malfunction are observed in Indesit top-loading washing machines. To fix the problem, disconnect the device from the network and proceed as follows:

1. Unscrew the fasteners and remove all panels, including the top cover.
2. Photograph the wire contacts and disconnect them.
3. If there is a drive belt, it is removed from the pulley groove.
4. Next, remove the mounts of the motor itself and take it out.

After this, you need to understand how to repair an Indesit washing machine. As a rule, restoring an engine is problematic, so it’s easier to buy a new one. It is installed in exactly the same way, but moved in the reverse order. If in doubt, it is better to entrust the diagnosis to a specialist.

Thus, repairing washing machines at home is quite possible, but only if the damage is not too serious and the user has the appropriate experience. To prevent failures, you must ensure the correct installation of the Indesit washing machine yourself and follow the basic operating rules.

You should also always monitor the error codes that appear on the display (or in the form of flashing indicators). They indicate malfunctions of the Indesit washing machine with vertical loading or a conventional front-type model. Moreover, if you are not sure where exactly the breakdown occurred, it is better to involve a specialist who can determine the exact cause and carry out the appropriate repairs.