When does the de error occur on an LG washing machine? What does this error mean and how can I resolve it?

Error dE on an LG washing machine is one of the most common. It lights up on the screen if there are problems closing the door. If you close it tightly until you hear a characteristic click, but the code still appears, you need to begin repairs. The article describes what can cause such a violation and how to eliminate it.

DIY repair

The dE error on the washing machine appears in cases where there is a problem with the door locking. In the simplest case, the cause is due to an improperly closed door. It needs to be opened and closed again, hearing a click. Moreover, it is better to do this at the moment when the device is already turned on (after pressing the “on” button).

On the other hand, LG shows the dE error even when the device that automatically blocks the sunroof is faulty. If there is no screen, then all the indicators on the panel light up or flash simultaneously, indicating the temperature level, washing modes and other options.

Self-repair is possible if the dE error appears for the following reasons:

1. Tank overload - then the LG washing machine shows the dE error, but in fact the reason is not related to the door itself or the locking device. The wash does not start due to overload - you need to remove some of the clothes and try again.
2. You need to understand what the dE error on an LG washing machine means.If it does not disappear after closing the door, you should inspect the rubber seal, that is, the cuff. It may well be damaged or covered with a layer of dirt.
3. The LG machine also displays the dE error if the door itself is damaged. Its repair is possible if you have the appropriate skills and available tools.
4. Finally, if clothes are stuck between the door and the rubber band, the seal of the entire structure is compromised. In this situation, it is clear what dE means on a washing machine. This code indicates that the door is not closed tightly enough. Moreover, even if the washing was running before, it will stop. Otherwise, water or steam may leak out.

Thus, when the LG washing machine shows the dE error, you should first open the door and change the laundry. If there is too much of it or some things are bulky, they will probably interfere with complete sealing. If laundry gets stuck between the door and the cuff, this problem should also be corrected.

If after this the dE error appears on the LG washing machine, you need to press the very center of the handle or door so that it closes tightly. As a rule, this is quite enough. If this measure does not help, proceed to repairs.

When to contact a specialist

When an Elgie washing machine gives a dE error, the breakdown may be more serious. It is necessary to carefully inspect the door and make sure that the sensor is intact and there is a magnet. If it is missing, the device blocking the hatch will not be able to work, so the washing process will not start.

There are other quite serious reasons when the dE code appears on an LG washing machine:

• the hook of the blocker is broken;
• the spring or clamp that secures the blocker has moved;
• the electronic sensor of the device blocking the hatch is broken;
• The electronic board of the control module has failed.

When error dE1 occurs on an LG washing machine, recovery actions depend on which element has failed:

1. If the door is skewed, does not close tightly or does not fit into the lock at all, it is necessary to tighten the hinges - they may be very worn.
2. When error dE1 appears on LG, and the washing does not start, but the door itself closes completely, the device blocking the hatch has broken down. A part will need to be replaced - as a rule, this work is performed by a specialist.
3. It is useful to know what dE means on an LG washing machine depending on when the code appears. If it occurs during a cycle and the washing stops and a burning smell appears, the problem is related to the control module. It may be damaged due to voltage changes in the electrical wiring or due to high humidity.
4. When the handle does not work properly, the door cannot lock into position with a characteristic click. In this situation, the dE error of the LG washing machine will also appear. The part cannot be restored, so it must be replaced with a new one.
5. If the hinges wear out, and even after tightening them the situation does not change, the problem is due to wear. Then the dE error will appear on the washing machine. Since the case is advanced, the only solution is to replace the hinges.

Separately, it is worth considering the case when the washing machine shows a dE error due to problems with the control board. If an electronic failure is observed for the first time, you can simply turn off the unit for a few minutes and then turn it back on. But when a reboot does not help, you need to remove the board, inspect it and, if necessary, replace damaged contacts.

Thus, the LG washing machine produces a dE error for a variety of reasons. In the simplest situations, it is enough to rearrange the laundry, remove bulky items and try to close the door tightly. Although this often does not help - then repairs are required. If you are not sure, it is recommended to invite an experienced specialist.