What are LG washing machine errors? What are they, why do they occur and how to repair them?

LG washing machine errors often indicate a failure not of a specific part, but of a system, for example, drainage or water supply. Over time, they inevitably appear on the display because the hose becomes clogged or parts wear out. The most common faults and how to fix them are described in this article.

Code dE

LG washing machine error codes can start with dE. This message appears when the user has just pressed the start button. Moreover, it is connected with the door lock or simply with the door not closing correctly. You can fix the problem like this:

1. Open the door again and close it tightly enough, making sure that there is a click.
2. If errors on your LG washing machine continue to appear, you need to carefully inspect the handle. It may be damaged or worn out. Particular attention is paid to the hook - it should spring well. This part may need to be cleared of any blockage.
3. If the error still continues to appear, you should reboot the unit, that is, turn off the power and plug it back into the network. But it also happens that the codes continue to be displayed on the display - then it is better for users to contact a service center.

Code E3

Sometimes error 03 may appear on an LG washing machine. It means that things are not loaded enough.For example, only socks or handkerchiefs were provided. The weight of these products is small, and the device perceives them as if they are not there at all.

Therefore, it is necessary to add at least 1-2 more items of clothing, for example, a shirt or jeans. In these cases, the LG washing machine will clear the error codes and start working normally.

CL message

The LG washing machine shows error codes that do not indicate any violations. The CL message only shows that the buttons are currently locked from being pressed by children. That is, protection has been installed in case a child starts randomly poking the keys and thus messes up the mode settings.

If you dial the secret combination of buttons specified in the instructions, the LG machine error codes under the CL message will disappear. That is, the lock is deactivated - then you can freely press any key. It is important to understand that the combination depends on the specific model of the unit, so information should be clarified in the instructions or description of the device.

If there is no data, you can press the keys responsible for the following modes:

• pre-wash, then super rinse;
• additional, then intensive wash;
• temperature key, followed by an options button.

IE error

If the IE error on your LG washing machine is displayed on the screen, it means that water is not entering the tank in full. This happens if the pressure in the water supply system is too weak. If the indicator is normal, the reason is related to other factors:

• closed tap - it needs to be opened fully;
• hose with kinks, creases - must be inspected and, if necessary, corrected;
• insufficient pressure in the water supply hose - unscrew it, place a container and turn on the water, checking how it flows;
• It is also recommended to remove the filter located in the hose and rinse it under running water.

Code lE

The lE error in the LG washing machine occurs in those units that are equipped with direct drive (that is, without a belt drive). This message can indicate a variety of problems and violations:

1. One simple reason is a poorly closed door. If it does not fit completely, you just need to close it tightly and check how the device works. In this case, you should make sure that there is a click.
2. A failure of the control system may also occur, for example, due to a sudden change in the power supply or due to the appearance of liquid drops on the surface of the electronic board. Then you need to turn off the device for a few minutes and then connect it again.
3. lE error on the LG washing machine also appears in a situation where too much clothing is placed in the drum, a lump is formed, for example, from a sheet and duvet cover, which causes an imbalance. The motor detects the load as excessive, causing the wash to stop. Therefore, it is necessary to take out the clothes, straighten them and, perhaps, set aside a small part for a second wash.
4. The lE LG error is also observed at low voltage in the electrical network. This is especially true for rural areas and private houses. You must wait until the situation normalizes, after which you can continue working again.
5. Another case when the l E error occurs in an LG washing machine is due to the ingress of foreign objects. This could be a loose lock, buttons, key chains or other hard objects. It is necessary to scroll the inner surface of the drum by hand. If it rotates poorly, it is necessary to remove the housing panel and eliminate the interference.

PE error

These malfunctions of the LG washing machine are not so common; they indicate a breakdown of the pressure switch - that is, the sensor that controls the liquid level in the tank. As a result, the indicator is determined incorrectly, so you need to perform several actions:

1. First of all, check the pressure in the water supply.
2. Then they inspect the hose - you need to make sure that it is in good condition, without kinks, blockages or holes.
3. If everything is in order, and LG error codes are repeated, you need to replace the sensor. Since it is difficult to do this at home, it is better to invite a qualified specialist.

FE error

LG machine errors may also occur in which the washing machine perceives the tank as full. In such cases, you need to perform several checks:

1. Is there foam in the tank - if there is a lot of it, it means that the wrong washing powder has been selected.
2. Then you need to make sure that the hose coming from the pressure switch is clean. It is dismantled, inspected and, if necessary, blockages are removed.
3. They inspect the valve that supplies water - sometimes a foreign object can also get into it, which will prevent it from closing normally.
4. Another possible reason is oxidation or damage to the contacts and wires on the sensor that monitors the pressure.
5. If after these procedures the FE error in the LG washing machine still does not disappear, it is recommended to contact a service center.

OE error

There are also LG SMA error codes that appear infrequently, but nevertheless also indicate a problem that needs to be quickly resolved. Among them is the OE message, when it appears, you should act as follows:

1. Check the operation of the control module by turning off the power to the washing machine for a few minutes and then turning it on again.
2. Make sure that there are no blockages in the hose - if there is debris, dismantle it and wash it under a stream of water. You can also clean it using strong wire.
3. Blockages can also occur in the drain filter. To do this, you need to open the unit panel from the bottom, unscrew the filter, moving counterclockwise, rinse it and put it back in its original place.
4. Problems may also be associated with a clogged sewer pipe. You can check this by the rate of water drainage in the bathtub and sink.

Thus, errors in washing machines can be very different. Some of them appear more often, others practically never occur. There are also messages that do not indicate any malfunction as such. For example, a TCL error in an LG machine simply indicates a recommendation to clean the drum. Therefore, you first need to accurately decipher the code, and then understand what exactly needs to be done.