The robot vacuum cleaner is not charging
A convenient charging substation for the robot vacuum cleaner allows you to carefully install it in the room and place it on the “base” immediately after use. Thus, the device always has enough power and its efficiency is sufficient to clean all rooms. But problems occur, as a result of which the device stops charging. Let's consider this option.
The content of the article
Why is my robot vacuum cleaner battery not charging?
You bought a new vacuum cleaner or have been using your favorite household appliance for a long time. But suddenly it stopped charging or the battery did not hold a charge well. It quickly discharges, stops working and does not perform the functions assigned to it.
There may be several reasons. It is important to analyze the work process and understand at what stage the vacuum cleaner stops working.
Possible problems
The first thing that can happen to the device is battery wear. Lithium batteries, which are usually installed in robot vacuum cleaner, become unusable within a couple of years. If your device has already worked properly for 2-3 years, you can safely change the battery. Most likely, it's her.
The second option is a rupture or damage to the connector in the charger. It prevents current from entering the device. Accordingly, charging does not occur. Before charging, clean all docking points from dust and dirt so that the docking station works correctly.
A common third problem is problems with the control board of a household device.In this case, even with a high-quality docking with the station, he does not see it. Charging does not occur, the device becomes useless.
Ways to solve the problem
If the problem is due to battery wear, you just need to buy a new one and insert it inside the robot vacuum cleaner. When purchasing a high-quality battery that is suitable for a specific model, the charging speed will not be affected.
In other cases, preliminary diagnostics will be required at a service center, after which the technician will say that it requires replacement at the moment. If the wires break, it may be possible to solder them yourself.
However, such a device will be removed from warranty if there is unauthorized tampering with the structural parts of the device.
If a problem is found in the control board, you will have to pay to replace it. Only a certified technician can install a new one. Otherwise, you will lose the warranty on the purchased product.
Problems with a robot vacuum cleaner are always associated with the failure of certain structural parts or contamination of the compartments. Take good care of your “helper”, and he will repay you with high-quality cleaning.
