The robot vacuum cleaner does not turn on
A robot vacuum cleaner is an indispensable thing in the household. Especially in families with small children and pets, where every minute counts and you really want to take time for yourself. The problem is even worse when your favorite “assistant” stops turning on. Breakdowns are common among household appliances, and the robot is no exception.
The content of the article
The robot vacuum cleaner does not turn on: reasons
The root cause of the problem, when the device does not start working after pressing the button, is considered to be the lack of battery charge. This is the most common option that owners of miracle technology contact service centers with.
The specialist will ask about this first, since charging stations and batteries often fail in such devices.
How to solve a problem?
Place the robot on the base. Make sure that the plug fits tightly into the socket, all wires are in good condition, and the device itself is installed on the podium. Check the charging indicator button. It should light up red, indicating that recharging has begun.
After the charging process is completed, the vacuum cleaner is removed from the base. After this, its performance is checked. It must operate from the control panel and perform the functions assigned to it.
The robot vacuum cleaner does not turn on after charging
Things are much more complicated when the device does not work even after a period of time on the charging base.It simply does not turn on and does not react in any way to the numerous manipulations of the owners.
There are four possible reasons:
- Battery fault. It must be removed and replaced with a new one, which will work correctly after recharging.
- Dead batteries in the control panel itself. They are also advised to replace them with new ones.
- Defects in the rubber scraper in vacuum cleaners with the iClebo system. In this case, it stops working or bounces in place. The problem will be solved after replacing this element.
- Water has entered the device.
The last problem is typical for robots designed for dry cleaning of premises. To solve the problem, it is important to unplug the device, remove the dust compartment and wipe everything dry. Then remove all filters and completely clean the vacuum cleaner from dirt and excess moisture.
After these manipulations, allow the device to dry and turn on the power again.
