How to properly clean a vacuum cleaner

No one is surprised that modern housewives prefer a vacuum cleaner to ordinary brooms and brooms. Cleaning is faster with it, and it copes with the collection of small debris much more efficiently. But do not forget that, like any complex household appliance, this device requires maintenance. You need to be able to clean it properly at home so that cleaning is a joy even many years after purchase.

When to clean your vacuum cleaner

Ideally, you should clean the device after every cleaning. With this care, the vacuum cleaner will last much longer. Before putting it away for storage, you need to perform a few simple steps:

• Check the nozzles for dirt and remove them.
• Dispose of debris from the cyclone filter and bag and wash them.
• Wipe the housing of the electrical appliance from settled dust.

Important! When cleaning a small area, these manipulations are allowed after every second or third use.

As it gets dirty The pipe and hose, as well as the foam and HEPA filters, should be cleared of debris.

How to clean a vacuum cleaner

To avoid accidentally breaking working parts, you should follow some rules when cleaning them.

Important! Before wet cleaning the vacuum cleaner, be sure to unplug it. Otherwise, there is a risk of getting an electric shock.

Filters of different types

The type of device depends on how you care for it.

With disposable bags

The easiest way to remove debris is a vacuum cleaner with disposable bags. When filled, the bag is simply detached and thrown away, and a new one is installed in its place.

Reference! As a rule, when cleaning a slightly dirty apartment, the original dust collector is enough for several months of active use.

But such devices have minor minus: As dust accumulates, the suction power decreases slightly, but still.

With reusable bags

Some cloth dust bags are reusable. In this case, they are allowed shake out or wash after emptying of debris.

Important! Reusable bags should also be replaced with new ones as they wear out.

With aqua filter

The aquafilter is the most effective in terms of dust retention. His cleaning consists of replacing dirty water with clean water and washing the walls.

With cyclone filter

Cyclone filters are desirable wash after every cleaning. The garbage is thrown out, and the bowl is washed with water and dried.

HEPA filters

There are disposable ones, but there are also reusable options.

To clean the HEPA filter, you need to remove large particles of debris and hair from its surface, and then rinse in soapy water.

With foam filters

The same applies to foam filters.

Important! Neither foam rubber nor HEPA filters can be wrung out. This can damage the structure, deform the product and lead to faster wear.

Carbon filters

They cope well with dust and unpleasant odors. But they are not intended for cleaning!

If you really want, you can walk over the surface with a brush to remove some of the debris.

Important! If worn and heavily soiled, the carbon filter should be replaced with a new one.

Brushes

In the basic configuration, the vacuum cleaner always comes with several attachments. They, just like other elements that come into contact with dirt, need regular cleaning.

• First, go over the brush with another attachment or just a pipe. This is done in order to clean the bristles or catching surfaces as much as possible from adhering debris.
• Hair and threads wrapped around rotating parts can be removed using scissors and tweezers.
• Use a damp cloth to remove dust from accessible surfaces and blades.
• If the nozzle is very dirty or it is difficult to clean it with your hands, you can rinse the brush under running water. But before using it again, be sure to dry it at room temperature until the moisture has completely evaporated.

Hoses and tubes

These parts often become clogged with large debris. If this suddenly happens, you should immediately clear the gap. Otherwise, the suction power drops critically, and increased load can lead to overheating of the motor.

• You need to disconnect the hose from the body.
• If there is a blockage in the lumen, it can be removed using a long object (metal wire, wooden or plastic stick with a hook, tweezers).
• Rinse the inside of the parts with a stream of water. If desired, you can use a sponge.
• Walk outside with a damp cloth to remove dust.
• Dry and reinstall.

Motor

This is the heart of an electrical device. You should not disassemble it yourself if you are not confident in your abilities. You should entrust engine cleaning to professionals. Service centers almost always provide this service.

But if you suddenly want to do this work yourself, then you need to follow the following steps.

• Remove the dust container, unscrew the bolts on the housing and remove the cover.
• Using a broom or dusting brush, carefully go over the parts. It is important to do this carefully so as not to disturb the location and attachment of the wires.
• Remove the microcircuit and blow off dust from the board.
• Place all the parts in their places, close the lid and tighten the bolts.

If everything was done carefully, the device will work with renewed vigor.

Frame

Many vacuum cleaners have not very good properties. They collect dust on the plastic surface. And also on the glossy body, greasy fingerprints and stains are very noticeable.

Washing the body and handles is not difficult. To do this, you do not need to carry out any complex manipulations or disassemble the vacuum cleaner. Simple enough walk over the surface of the plastic with a damp cloth or napkin. If necessary, you can use special liquids to remove fat (detergents, citric acid, vinegar, hydrogen peroxide, micellar water).