How to use a washing vacuum cleaner

You can increasingly hear about household appliances such as washing vacuum cleaners. They were the result of progress in the production of household appliances. However, the constant emergence of new models sometimes confuses consumers. It can be very difficult to understand the variety of species on the market. Questions arise: how to use them and why they are needed at all.

In our article we will talk about how to use a washing vacuum cleaner at home.

Possibilities of a washing vacuum cleaner

A washing vacuum cleaner has many different functions. It can be safely called universal, because it is suitable for both wet and dry cleaning.

This is its main advantage.

With this device you can clean almost the entire apartment without much effort and with great time savings.

Preparing for work

Before starting work, you will need to perform basic manipulations.

Advice. When using for the first time, first inspect the device and check that all components are present.

If everything is normal, you can begin the preparation itself.

Filling with water

• Please read the instruction manual carefully.
• This device has two water tanks - clean and dirty. You need to pour water into the smaller one. Be careful because the dirty water tank is usually not much larger.
• Detergent is not always added; you need to check this in advance in the instructions or with the seller in the store.

Assembly

You can then assemble the device and attach the remaining parts.

The work is performed in the following order.

• We put the nozzle on a flexible hose.
• We insert the hose into a special connector.
• We connect the cord to the network.

There is nothing complicated here. Therefore, all the above procedures will probably take you a little time.

IMPORTANT! Remember that if the volume of the water tank is small, then there is a possibility that during the process you will have to add liquid to it one or more times.

To do this, the device will have to be disassembled. Therefore, it is better to select in advance a device with a suitable volume that will allow you to complete cleaning the room without adding water.

Application

The functionality of this unit significantly exceeds the capabilities of a conventional vacuum cleaner, which is usually used only at the preliminary stage before wet cleaning.

Its washing counterpart differs precisely in that it combines the ability to do both. Let's take a closer look at its capabilities.

Washing and wet cleaning of various surfaces

What can be washed

It is worth remembering that with all the advantages of such a unit, it cannot be used for all coatings. For example, it is strictly forbidden to clean parquet or natural pile carpets with moisture, as it penetrates into them and these coatings begin to rot from the inside.

But no problems will arise with the following surfaces:

• linoleum;
• carpets made of unnatural pile;
• laminated coatings;
• stone;
• ceramics;
• glass;

IMPORTANT! Before you start cleaning, make sure that the surface is resistant to moisture and will not be damaged by using the device.

If everything is in order, then you can begin to act.

Mode of application

• Fill the tank with clean water, assemble the device as described above.
• Then treat the entire surface. Start washing from the corner, controlling the brush overlapping. If there is a need and the equipment is not prohibited, use detergent.
• If there is a lot of dirt on the floor, you will need a little more mixture.
• Then clean the floor with clean water.
• After this, you can start drying. To do this, use a nozzle with a suction effect.

Thus, in just a few minutes the surface will be cleaned of dust and dirt.

Dry cleaning

The principles of dry cleaning have been familiar to us since the days of widespread use of ordinary vacuum cleaners. Therefore, everything is even simpler here.

The difference is that with this mode of operation there is no need to add water.

You will also need a suction attachment.

Walk over the entire surface once or twice with the vacuum cleaner turned on at full power - not a trace of dust will remain.

Useful tips for using washing vacuum cleaners

• The device usually comes with a large number of different attachments. Take the time to look at them all and find out what each one is for. This can make cleaning your home a lot easier.
• A crevice brush, for example, will allow you to clean even the most difficult to reach areas.
• Particularly advanced models can even be equipped with a plunger attachment, which can be used to clean pipes. This once again emphasizes the indispensability and necessity of such a unit as a washing vacuum cleaner in the household.
• Over time, things can go wrong and the power will noticeably decrease.Before you panic, carry out a few simple operations that may help identify the problem and eliminate it at the root.

1. Remove the dust compartment and inspect it.
2. Rinse the bag with a special solution.
3. Clean the remaining parts, paying attention to each one.

And remember that after each use, you need to clean or simply wipe the most vulnerable places of the vacuum cleaner - the dust and water tanks. They may become damaged or become so dirty that the device stops working.

Now you know how to use such a wonderful invention as a washing vacuum cleaner.