Learning how to start a dishwasher for the first time. First load of dishwasher

It is quite simple to understand the instructions on how to start the dishwasher for the first time. The basic rule is that the first cycle should run idle, at maximum heat and maximum duration. After this you can start the first wash. Each process is described step by step in the presented article.

Test run

You should not immediately put dishes into the unit - many manufacturers, for example, Bosch, write in their instructions that it is best to start the dishwasher empty for the first time. The reason is due to contamination of the internal surfaces of the camera with dust, grease from the factory and other particles.

Starting the dishwasher for the first time allows you to solve several problems at once:

• Complete cleaning of the camera from dust particles and grease;
• checking the heater and temperature settings;
• removal of residual foreign odors;
• you can quickly master the functionality of the device (programs, temperature conditions, load level);
• Also, turning on the dishwasher for the first time allows you to verify the correct installation to the water supply and sewer pipes.

It’s not difficult to understand how to start a Bosch or other manufacturer’s dishwasher for the first time. After connecting to the network, you must remove all stickers and packaging, and then proceed as follows:

1. Make sure that the sprayer rotates correctly - to do this, just twist it by hand.
2. Remove the filter and check that it is intact and undamaged.
3. Find a container next to it in which special salt is placed. Next, open the lid, pour in water and add the product (for example, “Splash” or “SYNERGETIC”).
4. The first start of the dishwasher also requires the correct setting of the regulator, which controls the water hardness. If the water in a particular area is very hard, set the maximum value. If the hardness is average - medium, etc. It is worth remembering that the greatest hardness is observed in Moscow and in almost all regions of Central Russia.
5. Now you need to put the detergent in the appropriate tray. This can be 1 tablet or gel, the quantity of which is indicated in the description of the drug. You can find the dispenser on the inside of the door.
6. Next, find the desired button on the control panel and indicate what type of detergent is selected.
7. The next step in the instructions on how to turn on the dishwasher for the first time involves selecting a program. For a test run, the longest mode is suitable.
8. Set the maximum temperature level, and then start the process with the start button.

If you follow the described rules, the first launch of an Indesit dishwasher or another model will be successful. However, it is recommended to monitor how the device takes in water, whether it heats up quickly, and whether the waste liquid is completely drained at the end of the process.

In this case, special salt, as well as rinsing liquid, can be added in any quantities - the excess will go to the next cycle.But the detergent itself should be used only in a single amount, which will be used up at a time.

First wash

If the test test went well, you can start the dishwasher for 1 run. To do this, load plates and other items into baskets. Moreover, it is desirable to ensure uniform loading - for example, fill the basket halfway on the right and left.

Here's what you need to do to start your dishwasher for the first time:

1. Clear all utensils of food residues.
2. Place large items, such as a frying pan, in the lower tray. It must be placed so that there is no contact with the nozzle holes.
3. Place all the plates in the container in the middle. In order for the first launch of the Bosch dishwasher to go smoothly, it is better to place them as freely as possible, without touching.
4. Place forks, knives and other small items in the top tray. If necessary, adjust the height of the pallets - many modern devices have this option.
5. Next, add liquid detergent or a tablet to the dispenser and close the lid.
6. The first start of a Bosch dishwasher, as well as subsequent ones, involves the need to select the appropriate mode and specify the temperature level. After this, the process is started with the start button.

How to find out when the wash is complete

When the cycle ends, the device will beep. Many models also have a beam on the floor. This is the name of the indicator that shines on the floor directly in front of the door. During washing, a red beam lights up.

Upon completion of the process - green.

When the Bosch dishwasher is started for the first time, a display projection may appear on the floor instead of a beam. It shows the time remaining until the end of the wash. The same image can be seen every time the unit is used.

After the first start-up of a Siemens dishwasher or another model has been completed, it is recommended to check the quality of washing. It can be assessed by several indicators:

• perfect cleanliness;
• shine;
• absence of any foreign odors.

Possible problems

While learning how to use a dishwasher for the first time, you can also use the drying option. If it worked correctly, the plates will be completely dry, without streaks on the surface. If the quality is not up to par, the reason is not necessarily related to the device itself.

In fact, using the dishwasher for the first time may not be entirely correct, so it is recommended to pay attention to several points:

1. If the first start of the dishwasher was technically normal, but there are visible stains on the dishes, perhaps the plates were placed too close to each other, there were food residues on them.
2. Another mistake was the wrong choice of rinse aid, which caused the surface of the plates to become cloudy.
3. If a strong foreign odor is noticeable, it means you need to replace the detergent or add it in small quantities.

Now it’s clear how to start a Siemens dishwasher or other models for the first time. This is a fairly simple, but at the same time important procedure that will help clean the chamber and understand the structure of the unit. When the first load of the dishwasher has finished, you need to carefully inspect the plates. If necessary, replace the rinse aid or other products.