Dishwasher Indesit DSG 0517: instructions, frequent breakdowns and do-it-yourself repairs

The instructions for Indesit DSG 0517 contain detailed recommendations for using the machine at each stage: filling salt, rinse aid, detergent and loading the dishes themselves. A step-by-step description of actions, common breakdowns, as well as ways to fix them can be found in this article.

Salt filling and hardness adjustment

In most regions of Russia, water has moderate or high hardness. Because of this, a deposit of insoluble salts (scale) quickly forms on the heating element, which can lead to breakdown. Therefore, the instructions for the Indesit DSG 0517 dishwasher require the use of special salt, as well as setting the hardness regulator.

To do this, proceed like this:

1. Open the door and remove the lower dish tray.
2. Find a special container at the bottom of the chamber, open its lid by turning it counterclockwise.
3. In order not to cause malfunctions of the Indesit dishwasher, when using it for the first time, water is poured into this container to the upper level. The most convenient way to do this is with a funnel.
4. When the liquid is gone, salt is again poured to the top in the form of granules or crystals.
5. If a part has spilled, all residues must be removed.
6. Below, the instructions for DSG 0517 describe the process of setting the hardness level. You can determine the indicator using test strips (wet them in water and compare the color with the standard). Based on this, move the regulator knob to the appropriate position.

Using rinse aid and detergent

At the next stage, the instructions for the Indesit DSG 0517 dishwasher describe the process of adding rinse aid and detergent. To do this you need:

1. Find the dispenser, open the lid by turning it counterclockwise.
2. Fill the rinse aid no more than to the top level.
3. If necessary, wipe off any remaining drips and screw on the lid.
4. After washing, you can adjust the dispenser regulator. If there is water left on the plates, it is placed in the maximum position (4, 5). If whitish stains are noticeable, you need to set it to 1, 2 or 3.
5. To avoid encountering Indesit DSG 0517 error codes, you need to find the detergent cap next to the salt compartment. It is poured according to the instructions, depending on the selected program. For example, 21 ml is enough for a standard wash, and 25 ml for an intensive wash (if you use powder, the mass will be exactly the same - 21 g or 25 g).

Loading dishes and starting

Next you need to load the dishes and start the wash. The instructions for Indesit DSG 0517 provide the following sequence of actions:

1. The largest plates, as well as frying pans, pots and lids are placed in the bottom tray.
2. Spoons and forks are distributed in a special basket, and then placed in the desired compartment on the left or right, as shown in the diagram.
3. Then fill the upper tray with small objects - saucers, bowls, small saucepans, coffee pairs.
4. Select the desired mode (usually a standard wash) and start the wash.

The most common breakdowns and their elimination

Over time, various elements of the device may fail, so you will need to repair the Indesit dishwasher yourself. First of all, it is necessary to accurately determine the cause. To do this, you can study the main error codes:

1. F01 – a water leak is detected, which leads to automatic activation of the protective system. The machine turns off until the cause is completely eliminated. It is necessary to inspect the housing and hoses, make sure the sensor and control board are working properly.
2. F02 - such error codes DSG 0517 indicate a breakdown of the filling valve, which is why water has stopped flowing into the chamber. Repair comes down to replacing the element. The reason may also be due to kinks or creases in the drainage hose.
3. F03 – the water drains slowly, this clearly indicates that the drain filter, pipes, pump or other elements are clogged. The pressure switch may also be damaged - it must be replaced with a new one.
4. F04 – these error codes Indesit DSG 0517 indicate problems in the operation of the sensor that controls the temperature level. It is checked with a multimeter and if it breaks, it is replaced.
5. F05 – damage to the pressure switch or damage to the tube that goes to it. Another reason is excessive foaming due to improper use of detergent.
6. F06 – water does not enter the chamber well. Perhaps the supply hose is pinched in some areas, or the inlet filter or inlet solenoid valve is clogged. Each detail should be checked step by step.
7. F07 – the water metering turbine has failed. Other reasons include a blockage in the system that supplies water. In this case, you can fix the breakdown yourself.
8. F08 – the water does not heat up well, which indicates a breakdown of the heating element or temperature sensors or liquid level. You will need to check each element and replace it.
9. F09 – in this case, the Indesit dishwasher does not turn on due to a breakdown of the control module. It may have been programmed incorrectly. Requires professional repair.
10. F10 – when such a message appears, breakdowns of Indesit dishwashers are associated with a break in the heating element circuit. There was a break or the heating element burned out. You need to check it with a multimeter and replace or repair it.

In almost all cases of breakdown, it is necessary to understand how to disassemble an Indesit dishwasher. The device is disconnected from the network, the tap is turned off, and then the top and side panels are removed sequentially. If it is not possible to accurately determine the cause of the violation, it is advisable to contact a specialist.