What are the errors in a Kaiser dishwasher: error codes, what they mean and how to fix them, review
creativecommons.org
Kaiser dishwashers have excellent washing and drying performance, as well as built-in self-monitoring and diagnostic systems. But despite its highly efficient operation, a dishwasher can often encounter malfunctions, like any other equipment during operation. You need to know all possible breakdowns, which are indicated by error codes displayed in alphanumeric format on the dishwasher display. In some cases, it is enough just to replace certain parts to make the device work with renewed vigor.
Below is a detailed overview of the error codes that a Kaiser dishwasher can produce, their interpretation and information on what needs to be done in such situations.
First of all, if an error appears on the display, try to test the dishwasher yourself. To do this, you need to disconnect the device from the electricity, wait for 15 minutes and start again. If the error recurs, you must take the following actions:
1. Error code E1. This code means there is no signal when the door is locked. This error occurs when the door is not fully closed or the lock is damaged. Make sure you close the dishwasher door all the way and check the lock and wiring. If necessary, replace the cable.
2. Error code E2. This error indicates that the water intake time has been exceeded.This can happen when there is insufficient water pressure, a clogged hose or filter, or when the solenoid valve breaks down. In order to correct the situation, check the pressure, valve, and filter mesh. If clogged, it must be cleaned. The electronic part is checked with a special device - a multimeter. Optimal values are fixed in the range of 2000-5000 Ohms.
3. Error code E3. This error indicates that the time for draining water has been exceeded. This can happen if the drain filter or hose, siphon and sewer are clogged, as well as if the pump impeller is blocked. Inspect the elements for blockages.
4. Error code E4. This error indicates that the tray is full. This happens if the intake valve, pressure switch or electronic module malfunctions. Only a specialist can diagnose and fix the breakdown.
5. Error code E5. This error indicates a malfunction of the temperature sensor. This happens when the heater, temperature sensor or connecting circuit shorts. In such a situation, you need to call a technician to replace the thermistor or wiring. Repair work is carried out by a specialist.
6. Error code E6. This error indicates that the thermistor circuit has broken. For diagnostics, it is necessary to check all the parts responsible for heating the water (heating element, wiring or temperature sensor). The replacement is made by a specialist.
7. Error code E7. This error indicates that a short circuit has occurred in the heating element circuit. In this case, it is better to immediately contact a specialist.
creativecommons.org
Kaiser dishwasher: error E4, interpretation and meaning; what to do
Error E4 is one of the most common malfunctions that can occur with a dishwasher. Above is information about what the E4 code means and basic recommendations for resolving the problem.
Typically, when this error occurs, a plumber is called to check and reduce the pressure in the water supply.
You can independently limit the water supply to the dishwasher by closing the tap.
A specialist will also replace the fill valve and water level sensor.
In addition, code E4 indicates an electronic malfunction. In this case, the board needs to be replaced.
