How to disassemble an Electrolux dishwasher? Parsing algorithm

It is not difficult to understand how to disassemble an Electrolux dishwasher. First, the unit is prepared for operation, then the panels are dismantled step by step and work begins on the internal parts. Detailed step-by-step instructions with photos and descriptions of actions can be found in this article.

Preparing the machine and tools

It is quite possible to repair an Electrolux dishwasher yourself. But first you need to prepare the unit itself, as well as organize the space in the kitchen so that it is convenient to work. The main actions are:

1. Remove all baskets, compartments and other elements in the chamber that are not secured in any way.
2. Turn off the tap and turn off the power to the unit.
3. Prepare a basin, unscrew the hose through which water is supplied, and direct it into a container to collect the remaining liquid.
4. If the dishwasher is a built-in type, you need to unscrew all the fasteners.
5. Spread a sheet of thick cellophane or polyethylene in case of possible leakage.
6. Move the unit into a free space so that each side has easy access.

Disassembling an Electrolux dishwasher begins with preparing the following tools:

• Screwdriver Set;
• adjustable wrench;
• if repairs are necessary, you will need a soldering iron;
• multimeter;
• to perform delicate work you need tweezers;
• side cutter;
• pliers.

You may also need a flashlight and a phone with a fairly clear camera.The connections between the wiring and the main elements need to be photographed so that later they can be assembled in the correct sequence.

Step-by-step instruction

Disassembly begins with dismantling the panels, after which you can proceed to inspection and step-by-step removal of parts. The step-by-step instructions look like this:

1. Remove the cover from above, having first unscrewed each bolt.
2. The panel is removed from the bottom - it is secured with latches that are easy to open by prying it with a screwdriver. At the same time, you need to slightly open the door of the chamber into which the dishes are loaded, because it will interfere with the removal of the bottom panel.
3. The next step in the instructions on how to disassemble an Electrolux dishwasher involves unscrewing the fasteners from the back panel. The fasteners on each side of the decorative panel are also removed.
4. Then the walls are removed from the sides and the sound insulation is removed.
5. The next step is to turn the car over so that the bottom is on top. At the same stage, filters that purify water from contaminants are dismantled.
6. They dismantle it and place it in the bottom panel - it is this panel that hides all the internal parts of the device.
7. The bottom pan has a plastic piece that needs to be removed. To do this, unfasten the clamps that hold the motor, then the clamps of the water supply valve.
8. Now you need to lift the latch and remove the drain hose.
9. Disconnect the terminals.
10. And they move the pallet away.
11. Now you can begin dismantling the internal parts. They are examined and tested with a multimeter to ensure they are working properly. Then they install a new spare part and assemble all the elements in the reverse order.

It is quite possible to repair an Electrolux dishwasher yourself.In most cases, inspection and replacement of parts involve complete or partial disassembly of the unit. This is not difficult to do even if you have no skills. However, it is important to take pictures of each step so that you can easily assemble the parts later. If you are not sure, it is better to contact a specialist.