What is a partially built-in dishwasher? Review of the best models

A partially built-in dishwasher is a compact unit with a small width that can be placed under the countertop, even if there is not much space. At the same time, the control panel and door remain open, since they are not covered by the facade of the headset (unlike a fully built-in model). A description of such devices and a review of the best of them is presented in this article.

Description and types of device

It is quite simple to understand how a built-in dishwasher differs from a regular one. All units according to the criterion of embedding are divided into 3 types:

1. Fully built-in machines - they are installed under the countertop, and the front surface is covered with a facade made of the same material as the kitchen unit itself. Such designs look harmonious - in the same style.
2. Partially built-in ones are also installed under the countertop. But the front is open - some owners like to show off stylish equipment. This semi-built-in dishwasher resembles a washing machine that was simply installed in a pre-made niche in the unit.
3. Free-standing, that is, not built-in units. Such machines can be placed in any part of the kitchen where communications are connected.They can stand alone or be separated on the sides and top by decorative panels to fit into the overall interior.

It is clear what a built-in dishwasher means. This is a compact unit that is completely built into the furniture. While the door is closed, the dishwasher is not visible. And you might think that this is the niche of the set itself, for example, for pots or household appliances.

But if the device is partially built-in, it is always visible, since it is not separated by a facade from the front. Access to the door is direct - you can load dishes at any time, and then watch the process through transparent glass, as is the case with a washing machine.

Thus, the type of unit can be determined visually. Therefore, it is quite clear what a partially built-in dishwasher means. It is also useful to know about the classification of such devices depending on their dimensions:

1. Full size.
2. Narrow.
3. Compact.

Full-size units reach a width of 55-60 cm and approximately the same depth (that is, the distance from the front to the rear panel). They are as spacious as possible and can wash, for example, 13 sets of dishes at the same time. They consume quite a lot of water and electricity, so they are mainly used in large apartments.

Narrow devices process 8-10 sets. They are significantly narrower - they reach 45 cm in width and 55-57 cm in depth. We can say about such a partially built-in dishwasher that this is a good option for a small kitchen.

Finally, there are compact dishwashers, which are also 45 cm wide and only 50 cm deep. These are units with minimal dimensions that can be installed even in small kitchens. Designed for washing 6 sets of dishes, which is quite enough for a family of 3-4 people.Along with the small size, one of the advantages is the low consumption of water and electrical energy. These models are also more affordable in price.

Review of the best partially built-in models

Manufacturers produce devices of all types, including those designed for partial embedding. If you make a rating based on technical parameters, build quality and customer reviews, you will get this review.

Whirlpool WSIC 3M27

A narrow, roomy unit with a width of less than 45 cm. Capable of simultaneously accepting up to 10 sets of dishes. Equipped with an inverter motor and a complete leakage protection system. If it is not clear what a fully built-in dishwasher means and there are doubts about whether it will fit in the kitchen, it is worth considering this particular model.

Among its advantages are:

• low noise level within 47 dB, which corresponds to a normal conversation;
• several washing programs, including fast, water saving, and delicate;
• soaking option;
• drying option (condensation type);
• 4 temperature modes;
• delay start for a period from 1 to 12 hours.

Using this model as an example, it is easy to understand the relative difference between a fully built-in dishwasher and a built-in one. This slim model can simply be placed under the countertop and the control panel left open. Although the same unit can be enclosed with an external facade, and then the dishwasher will be considered completely built-in.

Bosch SPV4HMX1DR

Another compact device with a width of less than 45 cm. Designed for simultaneous washing of 10 sets of dishes. The dishwasher is equipped with an inverter motor and an operation indicator (sound signals). Intensive drying, class A. The main advantages are:

• complete protection against leakage;
• ability to control from a smartphone;
• high energy efficiency class (A);
• water consumption is only 9.5 l;
• slight noise within 46 dB;
• it is possible to delay the start for up to 24 hours;
• equipped with a three-component filter with a self-cleaning option.

If you look at the characteristics, it is difficult to understand how a built-in dishwasher differs from a regular one. Indeed, the difference is related only to the dimensions and the ability to fully or partially integrate the unit into a kitchen set. As for the main parameters, they are approximately the same.

Electrolux EEQ 942200 L

When learning what a built-in dishwasher is, users pay attention to the dimensions. As a rule, such devices have a small width. For example, the Electrolux model in question is only 45 cm. Despite this, it holds 9 place settings. The leakage protection system is partial, which can be considered a disadvantage. On the other hand, this device has many advantages:

• highest energy efficiency class (A++);
• touch control;
• minimum water consumption (up to 10 l);
• low noise level (within 46 dB);
• availability of 8 washing programs;
• minimum electricity consumption - only 0.69 kWh;
• possibility to choose among 4 temperature modes;
• There is a drying function (condensation type).

If necessary, the launch can be delayed for any period from 1 hour to a day. This is very convenient - for example, you can load the dishes in the evening and start the cycle in the morning, so as not to make noise at night.

Weissgauff BDW 4140 D

You can understand what a partially built-in dishwasher is using this model as an example. It is very narrow (up to 45 cm) and at the same time can accommodate 10 sets of dishes at once.You can choose from 8 programs, including a fast mode that takes only 30 minutes.

Other benefits include:

• high energy efficiency (A+);
• electronic control type;
• low water consumption (up to 9 l);
• low noise level (within 48 dB);
• short washing time even when selecting the normal program (3 hours);
• possibility of delaying the start for a period from 1 hour to 24 hours;
• convenient indication system in the form of a beam on the floor;
• complete protection against leakage.

The service life declared by the manufacturer is 1 year - during this time a full guarantee is provided provided that the operating rules are followed. However, in fact, the device serves for years without complaints.

BDIS15020

Another high-quality and inexpensive partially built-in dishwasher, it has a very affordable price. The width is within 45 cm, while the unit is spacious - it can process up to 10 sets of dishes. Other advantages include:

• quiet operation (up to 48 dB);
• low electricity consumption (0.73 kWh);
• electronic control;
• 5 programs, including fast and economical washing;
• condensation type drying;
• delay until 19:00

At the same time, water consumption reaches 12 liters, which is slightly more than a number of other models. However, the difference is small (1-2 l), so it is not particularly noticeable.

Thus, a partially built-in dishwasher is no different from a conventional unit with the exception of dimensions (smaller width and depth). These are typically top-loading units, allowing them to hold 8-10 place settings. Partially built-in narrow units are in great demand, since they can be placed even in a small kitchen.