Why is the heated towel rail cold?

There is a heated towel rail in every home. This part prevents mold, mildew and condensation from appearing in the bathroom, and also serves as a dryer for towels and other things. But sometimes it happens that the heated towel rail does not heat up or even becomes cold. And there are several reasons for this, which we will discuss below.

Reasons why the heated towel rail is cold

Why is the heated towel rail cold? As you know, models come in two varieties - electric and water. And if the lack of heat in the first case may be due to a lack of power or equipment failure, then in the second case everything is much more interesting.

Why is the heated towel rail cold, but the water comes out hot? Water options may stop heating for a number of reasons. And below we will talk about this in more detail.

The device does not heat up

The heated towel rail does not work after turning off the hot water quite often. It only gets there when the tap is open. In such situations, it is unlikely that it will be possible to correct the breakdown, and the best option would be to replace the water device with an electric model.

Hot water flows, but the heated towel rail does not heat

Why doesn't my heated towel rail heat up? The reason in most cases is the presence of traffic jams and blockages. Most consumers have installed heated towel rails quite a long time ago, and accordingly they are unlikely to realize that this device needs to be cleaned on a regular basis.

Why is the heated towel rail in the bathroom cold? If a malfunction occurs, it will not be enough to bleed air. You will need to close the water supply tap, dismantle the device, clean it using a wire with a brush at the end, and then flush the system.

Important! If the heated towel rail does not heat up, you will need to use not ordinary tap water, but a hydrochloric acid solution. It is poured into the system for a certain time, and then drained. The acid softens the remaining sediment, making it easy to remove after draining.

After carrying out the indicated procedures, the heated towel rail is installed in place and connected to the system, and then the water supply tap is opened and the device should begin to warm up.

No circulation

The reasons for a cold heated towel rail in the bathroom can be different. Sometimes devices stop giving off heat due to improper connection to the common line. Most often this happens when connecting to old thermal communications, where everyone changes the principle of connecting to the riser, guided by the reason “It’s so convenient for me.” In such cases, you will need to contact the Housing Office, since it is unlikely that you will be able to fix everything yourself.

How to tell if a device can be repaired

What to do if the heated towel rail in the bathroom does not work? Having determined the source of the problem, you will need to repair the device as soon as possible.But it is recommended to do this yourself only in situations where you have the appropriate knowledge and skills. And if there are none, then you will need to urgently contact a specialist who will restore the operation of the device again by eliminating the malfunction.

In other cases, the consequences can be more than dire. Breakthroughs are possible, as a result of which your apartment will fill with hot water, and water will also begin to drip from the ceiling of your neighbors living below.

Features of repair work

Why does the water heated towel rail in the bathroom not work? Having decided to fix the breakdown yourself, you will need to prepare the necessary tools and begin repairing the device, the progress of which will depend on the type of breakdown.

1. Electric heated towel rail clogged. If there is no circulation in the heated towel rail, in such a situation it will be necessary to produce a cold heated towel rail in the bathroom. It is disconnected from the electrical network, and then removed from the wall. Then you need to unscrew the valve and thoroughly clean the device using a metal wire, further cleaning the area of ​​the pipe located at the beginning. After completing this procedure, you can return the heated towel rail to its original position to check its functionality. If everything is fine, then you can use the device to its full potential and enjoy the optimal temperature in the bathroom.
2. The water pipes are clogged. If the heated towel rail is cold, although there is hot water, in this case you will also need to remove the device to drain the remaining water from it. And then you should start cleaning, as we have already discussed above in the text.
3. The appearance of an air lock.In such a situation, you will need to bleed air from the device using a Mayevsky tap. For these purposes, it is necessary to find the same crane by partially dismantling the structure. To do this, you need to take a screwdriver and slightly unscrew the bolt so that the air begins to escape. After this process is completed, water will begin to flow from the tap, which will indicate that the air lock has been successfully removed. At the final stage, you just need to return all the structural elements to their original places and check for functionality.