How to bleed air from a heated towel rail

It happens that residents of apartment buildings complain about the inoperability of the dryer, which is most often connected to central heating. This does not mean at all that the design is broken and unsuitable for further use. There are many other sources of defect occurrence. To convey to the reader information about why this appears and how to eliminate it is the purpose of this article.

Why do you need to bleed your heated towel rail?

First you need to understand the very purpose of the device. Why is it installed in bathrooms?

Because it is thanks to it that the atmosphere becomes softer due to drying, and the macroclimate in the room is maintained. And based on this, the appearance of various fungi and mold on walls, ceilings and baseboards is prevented. However, after prolonged use, water circulation may be disrupted as air mass accumulates inside the unit (this is called a plug). Sometimes it even stops heating and loses its benefits.

The most common reasons draining water from the heated towel rail:

• There are times when hot water in pipes evaporates quite slowly.This occurs due to bubbles formed inside, which interfere with the movement of warm liquid.
• The same harmless reasons include restarting the water supply after a short break in use, an incorrectly selected shape of the dryer, or the connection itself, which also guarantees the formation of a traffic jam.

Therefore, to prevent such phenomena from negatively affecting the quality of the atmosphere in the room, it is necessary to eliminate air from the system.

How often should you bleed the heated towel rail?

The answer to such a question is in demand among users who have just learned about the pressing problem. Of course, you can carry out fraud immediately after you notice a deterioration in the heat supply through the pipes. It is undesirable to put it off and hesitate, as the process gets worse over time. And if you release the mass, the structure will continue to operate at full power. Thus, the procedure should be carried out as the problem appears.

How to bleed air from a heated towel rail: step-by-step instructions

To eliminate the shortcomings in the operation of the device, you should initially take into account some nuances and features. Of course, doing it yourself is simple and easy; you don’t need the help of a specialist. There are two methods of liquidation.

Traditional way

Characterizes itself as a classic, standard method. Relies on the elimination of air by draining water. However, the steps depend on your location. If you live in a multi-story building, then you need to study the diagram to know where to open the tap. If you find a drain in your apartment, you have the opportunity to drain the liquid yourself.

1. The first step is to unscrew the nut connecting the hot water pipe to the dryer. This must be done using an adjustable wrench.
2. Prepare a container in advance that will be needed in case of drainage.
3. Next, you need to wait for the moment when, after weakening the product, various kinds of hissing begin.
4. The final step will be draining the water.

REFERENCE!

When the air stops coming out (there is no more air inside), the nut can be screwed back to its original place.

If the above method does not help resolve the problem, there are other options:

• It happens that in old-type buildings an individual approach to the situation is required. Here the owner needs to contact the person living on the top floor and bleed the air from his apartment. This is explained by the fact that the route of the hot water riser runs from the lower floor to the upper one, makes a loop there and leads back down. Therefore, air accumulates at the top point. So you need to do the same actions, just from a different place.
• In houses with nine floors, the DHW pipe and outlet are located in the attic. Therefore, you should get to it and follow the same instructions: open the tap and drain it into the sewer. However, this area may be inaccessible to outsiders; only plumbers can enter it. Then you should call them.
• If your building does not fit any of the characteristics of buildings, then all that remains is to call a special service, which will certainly help you figure it out and eliminate the malfunctions.

Method using a Mayevsky crane

Unlike the previous method, this one is more modern.

1. First, prepare a fairly large bowl for draining and place it exactly under the tap.
2. Unscrew the screw a little.
3. After the hissing, water should come out.Wait until it comes out with no air. This is a sign of final bleeding.
4. You can screw the product back on.

As you can see, this problem is quite simple and quite solvable. You can cope with it yourself, moreover, in different ways.