Why does the oven in a gas stove not light up?

The gas stove has become an indispensable kitchen assistant for any housewife. And currently the market is represented by a wide variety of models in different price categories. But sometimes, even in equipment from trusted manufacturers, for some reason the oven may not light up. Moreover, this happens at the most inopportune moment, and consumers ask the question: “What to do in such a situation?” First of all, don’t panic, because some breakdowns can be fixed on your own. You can also prevent them by following certain recommendations.

Why does the oven in a gas stove not light up?

The reasons why the oven in a kitchen stove stops lighting are different. There may be a failure in the gas leakage control system - this is important for stoves where the designated system is installed. And if there are problems with turning on the oven on such models, the cause of the malfunction may be:

• the thermocouple tip has moved from its designated position and is now not warming up well;
• the tip was clogged;
• There are other problems that require contacting specialists.

Other reasons:

1. The switch knob is loose. To check, you need to remove the plastic tip and turn the stem. If the oven continues to burn, then the problem is in the handle.
2. Problems with electric ignition.If it fails, problems with activating the oven may also occur.
3. Older models do not have electric ignition, which can cause blockages. To clean it, you need to disassemble the tile body and reach the gas distribution pipes.
4. Burner malfunction. The connection between the burner and the gas pipeline may be clogged, which will also require cleaning.

Causes that you can eliminate yourself

Not always, if the oven does not light, you need to call a specialist:

1. Lack of air. In such a situation, you can try lighting the oven with the door open.
2. Gas valve. Sometimes consumers simply forget to open a separate gas valve (if one is installed), and the oven does not turn on for this very reason.
3. Cleaning the burner. When carbon deposits fall on this part of the stove, the fuel simply will not reach the desired point due to insignificant pressure. To fix the problem, you just need to dismantle the burner and clean the dirty holes.
4. The burner is skewed. Sometimes, due to careless operation or careless cleaning of surfaces, the burner may become warped. Due to its incorrect location, it begins to burn unevenly or the flame takes on an orange tint. To fix the problem, you only need to adjust the position of this part.
5. The gas pressure in the pipe has decreased. Sometimes this happens, and the low intensity of the fire does not allow the oven to heat up to the desired level. This malfunction occurs very rarely, and to eliminate it you only need to refill the cylinder or install a new one.

IMPORTANT! In cases where the burner stops burning and does not ignite for about 15 seconds, you must wait 1-2 minutes before re-igniting.In other cases, there is a high probability of an explosion. Also, before attempting to light the oven, you should open the windows and ventilate the kitchen.

Preventive measures

Many problems can be prevented. First of all, it is necessary to focus on careful operation of the stove and oven in accordance with the instructions. In addition, it is necessary to regularly remove emerging contaminants. In cases where equipment malfunction could not be prevented, and you do not know how to fix it yourself, you will need to seek help from an experienced technician as soon as possible!